en
28
Switching
the appliance on
Fig.
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates
the selected temperature.
The appliance starts to cool, the light is
switched on when the door is open.
When the appliance has been switched
on, it may take several hours until the set
temperature has been reached. Do not
put any food in the appliance
beforehand.
Operating tips
■ While the refrigeration unit is running,
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
■ If the air humidity is high,
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.
Setting
the temperature
Refrigerator compartment
Fig.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated on
temperature display 4.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
Alarm function
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close the
door to switch off the warning signal.
Switching off the alarm
Fig.
Press the alarm button 5 to switch off
the warning signal.
AquaStop Alarm
The integrated AquaStop system
switches on when water comes out of
the mains pipe. The water supply is
automatically interrupted. The “lock” and
“on/off” buttons flash. The cooling
function of the appliance is not affected.
Switch off the water supply and inform
customer service.
