592526
14
Verklein
Vergroot
Pagina terug
1/79
Pagina verder
14 | English
1 609 929 M52 | (1.4.09) Bosch Power Tools
Maximum Steel Sheet Cutting Capacity
The maximum steel sheet cutting capacity d
max
depends on the strength properties of the ma-
terial to be cut.
The machine allows for cutting of metal sheet to
the following thicknesses:
Adjusting Cutter Clearance a
f Before any work on the machine itself, pull
the mains plug.
The cutter clearance a (gap be-
tween the cutters) depends on
the sheet thickness d
max
to be cut.
For softer or more ductile materials, the clear-
ance a must be decreased; for harder or more
brittle materials, increased.
Loosen the fastening screw 7 for the bottom cut-
ter. Adjust the required cutter clearance a with
the adjustment screw 6. The upper cutter 4 and
the bottom cutter 5 may not touch each other.
Retighten the fastening screw 7 for the bottom
cutter with a tightening torque of 34 Nm.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine itself, pull
the mains plug.
f For safe and proper working, always keep
the machine and ventilation slots clean.
Replacing the blade (see figure A)
The upper cutter 4 and the bottom cutter 5 are
identical, have four cutting edges each, and can
be exchanged with each other.
Turn or replace the cutters in good time. Only
sharp application tools achieve good cutting
capacity and make the machine last longer.
To replace the upper cutter 4, loosen the fasten-
ing screw 3; to replace the bottom cutter 5,
loosen the fastening screw 7.
Turn the cutter by 90° or install a new cutter.
When installing the bottom cutter 5, pay atten-
tion that it faces against the adjustment screw 6.
Note: Turn the cutter only in the direction indi-
cated in the figure and insert a new cutter only
in the position shown in the figure. Cutting is
not possible with an incorrectly inserted cutter.
Retighten the fastening screw 3 for the upper
cutter and the fastening screw 7 for the bottom
cutter with a tightening torque of 34 Nm.
Check the cutter clearance a (see “Adjusting
Cutter Clearance a”, page 14).
Upper cutter 4 and bottom cutter 5 may not be
reground.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Material Max. strength property
[N/mm
2
]
d
max
[mm]
Steel 400 1.6
600 1.2
800 0.7
Aluminium 200 2.2
d
max
[mm]
Cutter clearance a
[mm]
0.30.6 0.10
0.81.2 0.25
1.31.6 0.30
a
OBJ_BUCH-460-002.book Page 14 Wednesday, April 1, 2009 3:34 PM
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GSC 160 Professional bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GSC 160 Professional in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bosch GSC 160 Professional

Bosch GSC 160 Professional Gebruiksaanwijzing - Polski - 89 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info