786104
17
Verklein
Vergroot
Pagina terug
1/223
Pagina verder
English | 17
Material Planing width
in mm Cutting depth
in mm
0–1.0 0–2.0
Plywood < 20
20−30
Phenolic resin-coated
plywood < 15
15−30
MDF sheets < 20
20−30
Veneers 1
Hardwood veneers 3−5
Two-part filler 3−5
Cardboard 2
Start-up
Inserting the battery
Insert the charged battery (5) into the battery holder until it
is flush and you feel it engage.
Switching on/off
uMake sure that you are able to press the On/Off switch
without releasing the handle.
To start the power tool, first press the lock-off button (4),
then press and hold the on/off switch (4).
To switch off the power tool, release the on/off switch (4).
Note: For safety reasons, the on/off switch (4) cannot be
locked; it must remain pressed during the entire operation.
Battery charge-control indicator
When the on/off switch (4) is pressed in halfway or com-
pletely, the battery charge indicator (10) indicates the bat-
tery's state of charge for several seconds. The indicator con-
sists of three green LEDs.
LEDs Capacity
3 × continuous green light ≥ 66%
2 × continuous green light ≥ 33%
1 × continuous green light <33%
1 × flashing green light Reserve
Temperature-dependent Overload Protection
In the event of an overload, the speed is reduced. Allow the
power tool to cool down unloaded at its maximum no-load
speed for approx. 30 seconds.
Practical advice
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Planing Procedure
Set the required cutting depth and attach the power tool
with the adjustable planer base plate (14) to the workpiece.
uOnly bring the power tool into contact with the work-
piece when switched on. Otherwise there is danger of
kickback if the cutting tool jams in the workpiece.
Switch on the power tool and guide it over the surface of the
workpiece, applying uniform feed.
To achieve high-quality surfaces, apply only a low feed rate
and exert pressure on the middle of the planer base plate.
For the processing of hard materials, such as hardwood, and
also when utilising the maximum planing width, set only a
low cutting depth and reduce the planer feed as appropriate.
Excessive feed reduces the quality of the surface finish and
can lead to the chip ejector quickly becoming blocked.
Only sharp planer blades achieve good cutting performance
and make the power tool last longer.
Chamfering edges (see figure D)
The V-groove (15) in the front of the planer base plate en-
ables quick and easy chamfering of workpiece edges. Posi-
tion the planer with the V-groove onto the edge of the work-
piece and guide it along.
Groove used Dimension a
(mm)
V-groove 2.1–5.0
Medium 0.0–2.8
Maintenance and Service
Maintenance and cleaning
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
Clean the power tool at regular intervals using compressed
air.
Keep the side cutter block guard (8) clear and clean it regu-
larly.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Bosch Power Tools 1 609 92A 4LD | (19.02.2019)
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GHO 12V-20 Professional bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GHO 12V-20 Professional in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5.2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info