78670
22
Verklein
Vergroot
Pagina terug
1/122
Pagina verder
1 609 929 M67 | (12.11.07) Bosch Power Tools
22 | English
Reference Values for Maximum Screw/Bolt Tightening Torques
Calculated from the tensional cross-section; utilization of the yield point 90 % (with friction coefficient
μ
total
= 0.12). As a control measure, always check the tightening torque with a torque wrench.
Tips
Before screwing larger, longer screws into hard
materials, it is advisable to predrill a pilot hole
with the core diameter of the thread to approx.
2
/
3
of the screw length.
Belt Clip (see figure D)
With the belt clip 4, the machine can be hung on-
to a belt. The user has both hands free and the
machine is always at hand.
The belt clip 4 can be attached and screwed to ei-
ther side of the machine.
The belt clip 4 will automatically draw out when
pressing both release buttons. To dismount the
belt clip 4, remove the complete unit by unscrew-
ing the fastening screw.
Always tighten the fastening screw after mount-
ing the belt clip 4.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine (e. g., main-
tenance, tool change, etc.) as well as during
transport and storage, set the rotational di-
rection switch to the centre position. Unin-
tentional actuation of the On/Off switch can
lead to injuries.
f For safe and proper working, always keep
the machine and ventilation slots clean.
Replacing the Carbon Brushes (see figure E)
Check the length of the carbon brushes approx.
every 2
3 months and replace the carbon brush-
es if required.
Never replace only a single carbon brush!
Criteria for replacement of the carbon brushes: A
dotted or broken line is visible on one of the large
side surfaces of each carbon brush. When either
of both carbon brushes is used up to this line,
then both carbon brushes should be replaced im-
mediately in order to protect the armature
against possible damage.
Note: Use only carbon brushes supplied by
Bosch and intended specifically for your product.
Unscrew the caps 12 using a suitable screw-
driver.
Property Classes ac-
cording to DIN 267
Standard Screws/Bolts High-strength
Bolts
3.6 4.6 5.6 4.8 6.6 5.8 6.8 6.9 8.8 10.9 12.9
M 6
2.71 3.61 4.52 4.8 5.42 6.02 7.22 8.13 9.7 13.6 16.2
M 8
6.57 8.7 11 11.6 13.1 14.6 17.5 19.7 23 33 39
M 10
13 17.5 22 23 26 29 35 39 47 65 78
M 12
22.6 30 37.6 40 45 50 60 67 80 113 135
M 14
36 48 60 65 72 79 95 107 130 180 215
M 16
55 73 92 98 110 122 147 165 196 275 330
M 18
75 101 126 135 151 168 202 227 270 380 450
M 20
107 143 178 190 214 238 286 320 385 540 635
OBJ_BUCH-595-001.book Page 22 Monday, November 12, 2007 4:15 PM
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GDS 14,4 V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GDS 14,4 V in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info