651971
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Place the
outer duct with the fixed rail (3) onto the extractor hood
parallel to the other rails (1+2).
Slide the inner (upper) duct along the slide fixture into the outer (lower) duct. Make sure that the inner duct
is align
ed with the vents at the top.
duct or sliding back into the outer duct.
For extraction mode, correctly position the flexible
Pull the inner duct cover up a
nd
screwing in the plate screws (7)
(Fig. F)
I
II
Installing the activated carbo
nstalling the activated carbonstalling the activated carbo
nstalling the activated carbo
n filter for recirculation mode
n filter for recirculation moden filter for recirculation mode
n filter for recirculation mode
Remove the alumin
um grease filter.
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise until it
clicks into place.
Reinstall the alumin
um grease filter
NOTE
NOTENOTE
NOTE:
::
:
The activated carbon filter absorbs
odours
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform to the local standards
Improper connection may cause to an
Do not modify the appliance
plug
an authorized specialist.
The accessibility of the power plug must be ens
supply in case of an emergency.
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are
printed on the rating label.
Connect the mains cable to a
properly installed and earthed wall outlet.
The
extractor hood is operated via two slide switches. The
switched on and off w
ith the corresponding switches.
Fan:
Fan:Fan:
Fan:
0 Fan off I
Lowest fan
20
outer duct with the fixed rail (3) onto the extractor hood
(Fig. E)
. Fasten the rail (3) to the wall
Slide the inner (upper) duct along the slide fixture into the outer (lower) duct. Make sure that the inner duct
ed with the vents at the top.
Determine the extension length of the duct cover by pulling up the inner
duct or sliding back into the outer duct.
For extraction mode, correctly position the flexible
extraction hose.
nd
fasten the duct unit on the side to the
previously
(Fig. F)
.
n filter for recirculation mode
n filter for recirculation moden filter for recirculation mode
n filter for recirculation mode
um grease filter.
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise until it
um grease filter
.
odours
and must be replaced at least every six
months
The installation to the mains supply must conform to the local standards
and regulations.
Improper connection may cause to an
electric shoc
electric shocelectric shoc
electric shock!
k!k!
k!
plug
. If the plug does not fit properly to the outlet, let install a proper outlet by
The accessibility of the power plug must be ens
ured in order to disconnect the
appliance
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are
properly installed and earthed wall outlet.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
extractor hood is operated via two slide switches. The
lighting as well
as the fan settings must be
ith the corresponding switches.
Lowest fan
setting II Moderate fan setting III
. Fasten the rail (3) to the wall
Slide the inner (upper) duct along the slide fixture into the outer (lower) duct. Make sure that the inner duct
Determine the extension length of the duct cover by pulling up the inner
previously
mounted rail (2) by
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise until it
months
regardless of use.
and regulations.
. If the plug does not fit properly to the outlet, let install a proper outlet by
appliance
from the power
Ensure that your mains power corresponds with the specifications of the appliance. The specifications are
as the fan settings must be
Highest fan setting
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann DU 652 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann DU 652 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info