651971
19
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
NOTE
NOTENOTE
NOTE:
::
:
Recomm
RecommRecomm
Recomm
endations for preparation work
endations for preparation workendations for preparation work
endations for preparation work
When installing, ask another
person
Wear protective gloves to prevent injuries from any sharp edges.
1
4
Determine the position of the extractor hood centrally above the hob in conformance with the specified
safety distances.
Mark the necessary holes for the wall mounting
spirit level.
Drill Ø 8 mm mounting holes into
fasten the brackets with the
screws
Attach the suspension rail (1) for the hood body as well as the mounting rail with bracket (2) to the top
edge
parallel to the rail (1) (Fig. A). Determine the extension length of the duct cover in advance!
Before suspending insert the connecting piece with non
above. Make sure that the mounting hooks on the connecting piece latch into place.
For extraction mode:
For extraction mode:For extraction mode:
For extraction mode:
Hereupon the supplied
flexible extraction hose w
B)
and connected to the outside by the extraction outlet.
Hook the extractor hood into the
suspension
Remove the
protective plastic from the telescopic duct.
Fix the outer (lower) duct with
the mounting rail without the bracket (3). The rail is fastened to the holes
provided from the inside of the duct.
19
endations for preparation work
endations for preparation workendations for preparation work
endations for preparation work
person
to assist.
Wear protective gloves to prevent injuries from any sharp edges.
2
5 6
Determine the position of the extractor hood centrally above the hob in conformance with the specified
Mark the necessary holes for the wall mounting
by using the supplied drill template
the wall for the respective brackets (1+2+3).
Insert
screws
(6).
Attach the suspension rail (1) for the hood body as well as the mounting rail with bracket (2) to the top
parallel to the rail (1) (Fig. A). Determine the extension length of the duct cover in advance!
Before suspending insert the connecting piece with non
-
return valves (4) onto the extraction duct from
above. Make sure that the mounting hooks on the connecting piece latch into place.
flexible extraction hose w
ith an inner diameter of Ø 150 mm must be attached
and connected to the outside by the extraction outlet.
suspension
rail (1) (Fig. C). Check that it is se
cure
protective plastic from the telescopic duct.
the mounting rail without the bracket (3). The rail is fastened to the holes
Screw in two plate screws (7
) from the back (Fig.
3
7
Determine the position of the extractor hood centrally above the hob in conformance with the specified
by using the supplied drill template
and check them with a
Insert
the dowel pins (5) and
Attach the suspension rail (1) for the hood body as well as the mounting rail with bracket (2) to the top
parallel to the rail (1) (Fig. A). Determine the extension length of the duct cover in advance!
return valves (4) onto the extraction duct from
above. Make sure that the mounting hooks on the connecting piece latch into place.
ith an inner diameter of Ø 150 mm must be attached
(Fig.
cure
and horizontally level.
the mounting rail without the bracket (3). The rail is fastened to the holes
) from the back (Fig.
D).
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bomann DU 652 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bomann DU 652 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info