Pairing Your Headset with a Bluetooth device
1. Ensure the headset is off, and the distance between your headset and phone is
within 1 meter.
2. Press and hold MFB for about 6 seconds until the indicator light flashes blue
and red alternately as PAIRING MODE.
3. Activate the Bluetooth function on the phone, search Bluetooth devices (See
the user guide of your phone for instructions).
4. Select headset “BPMPHS” (BlauPunkt MotoPilot HeadSet) from the found
devices list of the phone.
5. Enter the passkey “0000” if asked for, confirm to pair the headset with your
phone. If successfully paired, the headset will beep, and the indicator light will
flash blue every 10 seconds. (If the pairing cannot be completed within 5 minutes
after the PAIRING MODE has been activated, the headset will enter into the
STANDBY MODE. Repeat above steps to do the pairing again).
6. Ensure the distance between your headset and phone is within 10 meters, and
without any obstacles. You can use the headset freely.
7. If the headset had paired with your phone but disconnected, it will paired
automatically again when turns on within operation range.
Answering/Ending a Call
Press MFB once
Rejecting a Call
Press and hold MFB for 3 seconds
Voice Dialing
In STANDBY MODE, press and hold V- for 3 seconds. Say the voice tag as soon
as you hear the short beep (ensure your phone supports voice dialing function,
and you have recorded the voice tag into your phone. See the user guide of your
phone for instructions.)
Processing two calls
When you are answering one call, there is another call coming:
1. Press headset MFB to hold on the current call and answer another call
2. Press the headset MFB to transfer the call from one to another.
3. Press the headset MFB for 1 second, you can end the current talking call and
answer the retained call.
Note: All the above operations have to respect the precondition that mobile
supports Bluetooth handsfree profile V1.5 and mobile are running under call
holding function from telecom.
Last Number Redialing
Press MFB twice