389404
8
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
8
ENGLISH
Fitting sanding sheets (fig. F)
Detach the two diamond-shaped tips (18) from the
sanding sheet (19).
Hold the tool with the sanding base facing upwards.
Place the sanding sheet (19) onto the sanding base,
making sure that the holes in the sheet line up with the
holes in the base.
The diamond-shaped tip (18) can be reversed and replaced
when worn.
When the front part of the tip is worn, detach it from the
sheet, reverse it and press it onto the sanding base again.
When the whole tip is worn, remove it from the sanding
base and fit a new tip.
Tip of the sanding base (fig. G)
When the sanding base tip (6) is worn, it can be reversed or
replaced. When the tip holder (5) is worn, it can be replaced.
Spare parts are available from your Black & Decker dealer.
Remove the screw (20).
Reverse or replace the worn part.
Fit and tighten the screw.
Finger attachment (fig. H)
The finger attachment is used for fine detail sanding.
Remove the screw (20).
Remove the diamond-shaped tip holder (5) from the
sanding base.
Fit the finger attachment (10) onto the sanding base.
Fit and tighten the screw.
Fit the appropiate sanding sheet (21) onto the finger
attachment.
Profile attachment
The profile attachment is used for contour sanding.
Fitting the profile attachment (fig. I)
Remove the screw (20).
Remove the diamond-shaped tip holder (5) from the
sanding base.
Fit the profile attachment (8) onto the sanding base.
Fit and tighten the screw.
Fitting and removing a sanding profile (fig. J1 & J2)
Choose the sanding profile most suitable for your application.
Place one end of the sanding profile (9) into the recess at
the front end of the profile attachment (8).
Push the other end of the sanding profile until it clicks
into place.
To remove the sanding profile (9), push it forward and pull
the rear end out of the profile attachment (8).
Fitting a sanding sheet onto a sanding profile (fig. K)
Align the sanding sheet (22) with the sanding profile (9).
Press the sanding sheet onto the sanding profile, making
sure that the sanding sheet follows the shape of the profile.
Louvre attachment (fig. L & M)
With the louvre attachment you can work in crevices.
Remove the screw (20).
Remove the diamond-shaped tip holder (5) from the
sanding base.
Fit the louvre attachment (12) onto the sanding base.
Fit and tighten the screw.
Fit the appropiate sanding sheet (23) onto the louvre
attachment.
The additional piece of velcro fastener (24) can be attached to
the top surface of the louvre attachment (12) to allow for
sanding using both sides.
Remove the backing paper from the velcro fastener (24).
Stick the velcro fastener to the top surface of the louvre
attachment.
Fit the sanding piece (23) to the velcro fastener.
Use
Warning! Let the tool work at its own pace. Do not overload.
Warning! Do not cover the ventilation slots when using the
tool. Hold the tool as shown in fig. Q. Make sure that the
sanding base is flat on the workpiece.
Switching on and off (fig. N)
To switch the tool on, set the on/off switch (1) to position I.
To switch the tool off, set the on/off switch to position O.
Automatic brake system (ABS)
This tool has an automatic brake system. When the tool is not
on the work surface, this feature keeps the speed of the disc
below the speed of the motor. When the tool is switched off,
the disc will stop very quickly.
Emptying the dust cassette (fig. O & P)
The dust cassette should be emptied every 10 minutes of use.
Pull the dust cassette (3) to the rear and off the tool.
Remove the cover (25) by twisting it counterclockwise.
Hold dust cassette with the filter (26) facing down and
shake the cassette to empty the contents. Shake the
cover to empty the contents.
Refit the cover (25) onto the dust cassette, twisting it
clockwise until it locks into place.
Refit the dust cassette onto the tool.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Black-Decker-ka-270

Zoeken resetten

  • ik ben het deksel kwijt vd de afzuiging en wil graag ook een nieuwe filter zie pagina 5 P25 en 26 hoe kom ik daaraan mijn telefoon is 06-51690712 Gesteld op 13-8-2021 om 00:49

    Reageer op deze vraag Misbruik melden
  • Beste,
    Machine draait niet meer goed. als ik de zoolplaat loskoppel, draait de motor wel nog , bij belasting dus niet.
    Heb machine proper geblazen. Zijn de borsteltjes dan versleten ? Gesteld op 5-6-2021 om 20:38

    Reageer op deze vraag Misbruik melden
    • Hallo , ik heb het zelfde probleem, schuurzool eraf , draait de machine prefect , zool erop gemonteerd, draait hij vast Geantwoord op 23-3-2023 om 14:19

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker ka 270 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker ka 270 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info