389404
7
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
7
ENGLISH
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from those intended could result
in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional safety instructions for sanders
Always wear a dust mask whenever sanding.
Thoroughly remove all dust after sanding.
Take special care when sanding paint which is possibly
lead based or when sanding some woods and metal
which may produce toxic dust:
- Wear a dust mask specifically designed for protection
against lead paint dust and fumes and ensure that persons
within or entering the work area are also protected.
- Do not let children or pregnant women enter the work
area.
- Do not eat, drink or smoke in the work area.
- Dispose of dust particles and any other debris safely.
Before using the tool on wooden workpieces, make sure
to fit the dust cassette.
Before using the tool on metal workpieces, make sure to
remove the dust cassette.
Never use the tool without a sanding sheet.
Never use the tool without a sanding base.
This appliance is not intended for use by young or infirm
persons without supervision. Children must be supervised
to ensure they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Electrical safety
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Gel comfort grip (KA270GT(K) only)
3. Dust cassette
4. Large detail sanding base
5. Tip holder
6. Sanding base tip
Fig. A
7. Random orbit sanding base
8. Profile attachment (KA270(GT)K only)
9. Sanding profiles (KA270(GT)K only)
10. Detail finger attachment (KA270(GT)K only)
11. Spare sanding base tip (KA270(GT)K only)
12. Louvre attachment (KA270LDK only)
Assembly
Warning! Before assembly, make sure that the tool is switched
off and unplugged.
Random orbit sanding base
With this sanding base, you can use the tool as a random orbit
sander.
Fitting and removing the sanding base (fig. B)
Place the sanding base (7) onto the spindle (13).
Place the washer (14) onto the spindle.
Insert the Allen screw (15) into the screw hole in the spindle.
Tighten the Allen screw using the Allen key (16) supplied.
To remove the sanding base, remove the Allen screw (15)
and washer (14).
Fitting sanding sheets (fig. C)
Hold the tool with the sanding base (7) facing upwards.
Place the sanding sheet (17) onto the sanding base (7).
The holes in the sheet do not need to line up with the
holes in the base.
Large detail sanding base
With this sanding base, you can use the tool as a detail
sander or an orbital sander.
Fitting and removing the sanding base (fig. D & E)
For detail sanding, the pointed end should face forward as in
fig. D. For sanding large areas, the pointed end should face to
the back as in fig. E.
Place the sanding base (4) onto the spindle (13). Make
sure that the legs of the base locate into the tool.
Place the washer (14) onto the spindle.
Insert the Allen screw (15) into the screw hole in the spindle.
Tighten the Allen screw using the Allen key (16) supplied.
To remove the sanding base, remove the Allen screw (15)
and washer (14).
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Black-Decker-ka-270

Zoeken resetten

  • ik ben het deksel kwijt vd de afzuiging en wil graag ook een nieuwe filter zie pagina 5 P25 en 26 hoe kom ik daaraan mijn telefoon is 06-51690712 Gesteld op 13-8-2021 om 00:49

    Reageer op deze vraag Misbruik melden
  • Beste,
    Machine draait niet meer goed. als ik de zoolplaat loskoppel, draait de motor wel nog , bij belasting dus niet.
    Heb machine proper geblazen. Zijn de borsteltjes dan versleten ? Gesteld op 5-6-2021 om 20:38

    Reageer op deze vraag Misbruik melden
    • Hallo , ik heb het zelfde probleem, schuurzool eraf , draait de machine prefect , zool erop gemonteerd, draait hij vast Geantwoord op 23-3-2023 om 14:19

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker ka 270 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker ka 270 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info