531188
8
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
8
ENGLISH
Temporarily parking the suction
head (fig. H)
Use the park position (22) for a
temporary parking of the suction head.
Storing the appliance (fig. I)
Warning! When storing the appliance,
switch the appliance off and unplug it.
Make sure that the cord is fully
rewound.
Place the appliance in an upright
position.
Park the tube in the park position (23).
Store the appliance in a dry location.
Maintenance
Your Black & Decker appliance has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation
depends upon proper appliance care and
regular cleaning.
Warning! Before performing any
maintenance or cleaning on the
appliance, unplug the appliance.
Regularly clean the ventilation slots
in your appliance using a soft brush
or dry cloth.
Regularly clean the motor housing
using a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Emptying the dust container
(fig. J & K)
The dust container (9) must be emptied
when the maximum mark is reached or
the bin full indicator (11) changes from
green to red.
Remove the hose.
Press the release button (24).
Hold the dust container at the handle
(25). Slide the container (9) out of the
appliance.
Hold the container over a waste bin.
Press the release button (26) to open
the container (fig. K). Empty the dust
container as necessary.
Close the base (27) by moving it
upward until the lock locates in the
latch.
Re-insert the container into the
appliance until it locks into place.
Cleaning (fig. J - N)
Warning! Before cleaning and
maintenance, switch the appliance off
and unplug it.
From time to time wipe the appliance
with a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Do not immerse the appliance in water.
The appliance is fitted with 5 filters.
Four of these are accessible to the user
and are replaceable. The fifth filter is
internal to protect the motor. The four
filters are: pre-filter cover, main filter, bin
filter and exhaust filter.
Cleaning the dust container filter
(fig. J - M)
The dust container filter prevents dust
and dirt from entering the motor housing.
The filter is re-usable. There are two
levels of filtration: pre-filter and main
filter. To maintain efficient suction
performance, the filter should be cleaned
every week, or whenever suction
performance is noticeably reduced. The
appliance is fitted with a bypass valve.
When the filter is clogged, the operation
of the valve is audible. This is normal and
does not indicate a problem. Switch off
the appliance and remove the plug from
the socket before cleaning the filters.
Remove the container (9) from the
appliance (fig. J).
Empty the container (fig. K).
Remove the cartridge (28) from the
container by turning it clockwise (fig. L).
Remove the pre-filter cover (29) from
the main filter (30).
Shake off excess dust by tapping the
filter into a dustbin.
Warning! Do not brush or use
compressed air to clean the filter.
Depending on its condition, rinse the
outside of the filter with water.
Allow the filter to dry for 24 hours
before re-inserting it.
Warning! Do not wash the inside of the
filter.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker VB2010P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker VB2010P in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info