531188
7
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
7
ENGLISH
Mounting accessories (fig. D)
The crevice tool (12) allows for
vacuuming in narrow and hard-to-reach
places. The brush tool (12) allows for
vacuuming on furniture, blinds, curtains,
windows and stairs. The upholstery brush
(13) allows for vacuuming furniture.
The accessories can be mounted on both
the hose (5) and the tube (7).
Push the accessory onto the hose
nozzle (18) or the tube (7).
To remove an accessory, pull the
accessory from the hose nozzle or
the tube.
Selecting the crevice tool or
brush tool (fig. E)
To use the crevice tool, move the
brush part (19) against the direction
of the arrow.
To use the brush tool, move the
brush part (19) in the direction of the
arrow.
Use
Unwinding and rewinding the
power cord
The cord rewind button (2) can be
operated by hand or foot.
Pull a sufficient length of cord from
the back of the appliance.
After use, press the cord rewind
button to retract the cord into the unit.
Manually guide the cord to ensure it
does not swing back. Ensure the plug
is correctly located.
Adjusting the tube length (fig. F)
The extension tube (7) can be adjusted
as follows:
Push the knob (20) and slide the tube
to the desired length.
Release the knob.
Adjusting the suction head (fig. D)
For vacuuming on carpets, switch the
brush actuator (21) into the up
position.
For vacuuming on laminates, tiles,
etc., switch the brush actuator into
the down position.
Switching on and off
The on/off switch (1) can be operated by
hand or foot.
To switch the appliance on, press the
on/off switch (1).
To switch the appliance off, press the
on/off switch again.
Setting the suction force
The speed control selector (3) allows for
a precise setting of the suction force.
For vacuuming on a hard surface
(e.g. floors), choose a high speed setting.
For vacuuming on soft surfaces
(e.g. upholstery), choose a low speed
setting.
Slide the speed control selector to
the desired setting.
Adjusting the airflow (fig. G)
Move the airflow control switch (6) to
adjust the airflow as desired.
Vacuuming
When operating the appliance, make
sure that the hose is not trapped,
twisted or blocked.
In case of overheating, a cut-out will
operate and the appliance will
automatically stop.
If the appliance stops operating,
unplug the appliance and allow it to
cool for 2-3 hours before continuing.
Ensure the filters are cleaned and the
unit is blockage free before switching
back on.
Hints for optimum use
When vacuuming stairs, always start
at the bottom and work your way up.
Position the appliance on the floor
and do the stairs until halfway. Then
carry the appliance to a stable
position which is at least one stair
below your working position, and do
the top half of the stairs.
Carrying the appliance
During use the appliance can be carried
using the handle (4).
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker VB2010P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker VB2010P in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info