586348
11
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
11
Position C - Minimum blow speed.
Once you have blown the debris/leaves
into a pile, you can convert to vacuum
mode to collect the debris.
Removing blow/vacuum tube (Fig. F)
Switch off your product and disconnect
from the mains power supply. (If in vac
mode, remove the bag).
F
To disconnect the tube from the
powerhead, depress the release button
as shown (Fig. F1), ensuring the tube
does not fall to the ground.
The release button will not depress if
on/off switch is in the forward on
position.
Vacuum mode (Fig. E & F)
Ensure your product is switched off and
disconnected from the mains power
supply.
E
Attach the vacuum tube in the same
way as stated previously for the GW250
blow mode (Fig. E1 & Fig. E3).
To fit the bag assembly to your product:
F
Align the notches on the bag fitting with
the recesses on the vacuum outlet
(fig. F2).
Slide the bag fitting onto the vacuum
outlet and tighten the fitting (fig. F3).
Locate the front of the collection bag
into the clip on the underside of the
vacuum tube (Fig. F4).
Using the nylon band locate the rear
of the collection bag over the lip
positioned at the rear of the powerhead
(Fig. F5 & Fig. F6).
Ensure the bag zip is closed before
operation (Fig. F5).
Position the tube slightly above the
debris/leaves. Switch your product on,
then using a sweeping motion the
debris/leaves will be sucked up the
tube, shredded and thrown into the
collection bag (Fig. F7).
As the bag fills the power of the suction
will decrease, switch off your product and
unplug from the mains power supply.
To remove the bag, unclip it using the
nylon handle as shown (fig. F6) and
loosen the fitting. Unzip the bag and
empty it before continuing (fig. F9).
Fitting of the blower vac wheel
(Fig. G) (K models only)
Disconnect your product from the
electricity supply before fitting the
wheel.
Note: To be used in the vac mode only.
G
Locate the wheel onto the vac tube.
Fault finding
Disconnect from the mains power supply
before attempting any maintenance.
Failure to operate (1) Check the connection to the
power supply.
(2) Check the fuse in the plug, if
blown, replace (UK only).
(3) Check that the blow/vacuum
tube assembly is correctly fitted
to the powerhead.
(4) If the fuse continues to blow -
immediately disconnect from the
mains power supply and consult
your local Black & Decker
authorised repair agent.
Poor vacuum/ (1) Switch off - disconnect from
high pitched whinethe mains power supply, debris
should fall clear of the tube.
(2) Remove and empty the
collection bag.
(3) Check that both the inlet and
exit ports on the vacuum tube
are clear.
(4) Remove any debris from the
fan area.
(5) If poor vacuuming continues -
immediately disconnect from the
mains power supply and consult
your local Black & Decker
authorised repair agent.
Poor shredding (1) Switch off - disconnect from
the mains power supply and
remove the collection bag.
(2) Remove the vacuum tube
and inspect the fan.
(3) Clean any debris from the fan
blades.
(4) If the fan is cracked or
damaged, do not use - consult
your local Black & Decker
authorised repair agent.
ENGLISH
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Black-Decker-GW254-T5

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GW254 T5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GW254 T5 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info