586348
10
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
10
Warning! The use of an RCD or other
circuit breaker unit does not release the
operator of your product from the safety
instructions and safe working practices
given in this manual.
Assembly prior to use (Fig. B & F)
Vacuum tube assembly (Fig. B1)
B
Vacuum tubes must be assembled
together before use.
To ease assembly apply soapy water
solution to joint area.
Align location ribs on upper (4) and
lower (5) tubes.
Push both parts firmly together until clip
is engaged, as per moulded detail.
(Never operate apart).
In the interests of safety, it is not
intended for the tubes to be separated
once assembled.
Blow tube assembly (Fig. B2)
Blow tubes must be assembled
together before use.
To ease assembly, apply a soapy water
solution to the joint area.
Align location ribs on the upper (6) and
the lower (7) tubes.
Push both parts firmly together until the
clip is engaged (never operate apart).
In the interests of safety, it is not
intended for the tubes to be separated
once assembled.
Blow tube assembly (GW254) (Fig. B3)
Fit the lower tube (14) over the middle
tube (13), until the lock button (15)
clicks in place.
Align the cross mark on theassembled
blow tube with the cross mark on the
upper blow tube (6).
Insert the assembled blow tube into the
upper blow tube and turn it to lock it in
place.
Alternatively, the flexi-piece (16) can be
fitted between the upper blow tube and
the assembled blow tube. With the
flexi-piece, the unit can be handled
more easily and with greater control.
Carrying strap assembly (GW250) (Fig. B4)
Fit the carrying strap to the powerhead,
if required, and adjust to suit the user.
Warning! The shoulder strap should only
be used during vacuum mode. Never use
the strap during blow mode.
Carrying strap assembly (GW254)
(Fig. B5 & B6)
For use in flexi-blow or vacuum mode.
Fit the small loop over the T-handle.
Adjust the large loop to suit the user.
The unit can now be hung over the
shoulder and handled as shown.
Collection bag (GW225) (Fig. F8)
F
Attach the collection bag to the vacuum
outlet using the bayonet fitting.
On/off switch (Fig. C)
C
The on/off switch (2) is located on the
handle of the powerhead.
To switch your product on, push the
switch forward.
The switch will not operate if the release
button (3) is depressed.
To switch off, push the switch to the rear.
Cable restraint (Fig. D)
D
A cable restraint is incorporated into the
rear of the powerhead.
To fix cable, form a loop in the cable
and insert as shown.
Using your product (Fig. E)
When using as a blower or vacuum, always
wear safety glasses. If using in dusty
conditions, wear a filter mask as well.
Blow mode (GW250/GW254)
Ensure your product is switched off and
disconnected from the mains power
supply.
E
Attach the blow tube (6) to the
powerhead (1) (Fig. E1) by locating the
tube as shown, then pivot about this
point until the locking/release catch is
fully engaged (Fig. E2).
Hold the blow tube approximately
180mm (7) above the ground, switch
your product on and using a sweeping
motion from side to side, advance
slowly keeping the accumulated debris/
leaves in front of you (Fig. E4).
Blow control (GW225/GW250) (Fig. E5)
Position A - Maximum blow speed.
Position B - Blow control can be varied
between positions A and C. To do this,
depress the latch as shown and slide
the control forward/backward to obtain
desired airspeed, then release the latch
to lock.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Black-Decker-GW254-T5

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GW254 T5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GW254 T5 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info