527583
9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
5
‘female’ connector ‘male’ connector
Warning! Never wire an extension cable with
anything other than the ‘female’ connector
supplied and a 13 amp BS1363A approved
plug with the recommended fuse. Never
wire a ‘male’ connector to your extension
cable and never wire an extension cable
with a plug of any kind at each end of the
cable. This is extremely dangerous and
results in the pins being live which may
cause a fatal electric shock.
Fitting the ‘female’ connector
(UK only)
To remove the cover, unscrew the fixing screw until it
is free of the nut which is located in the hexagonal
recess on the underside of the connector. Take care
not to lose the nut if it falls out. There is no need to
completely remove the fixing screw as it is intended
to remain captive in the cover. The cover can now be
removed by applying pressure as shown below.
apply pressure here
The extension cable contains two wires which are
colour coded for easy recognition; brown is for ‘Live’
(L) and blue is for ‘Neutral’ (N). The female connector
is marked ‘L’ for live and ‘N’ for neutral. These
markings are located inside the body near the
terminal screws (see opposite, figure a). With the
connector cover removed, lift out the cable protector
and proceed as follows:
Pass the cable through from the narrow end of
the cable protector (see opposite, figure a).
Prepare the cable ends to the specified strip
lengths (see opposite, figure b).
Existing cable systems (UK only)
If you already own an outdoor cable system, we
recommend that you replace the existing ‘female’
cable connector with the new ‘female’ connector
(see below) which is supplied loose in the carton.
(Please read the section entitled “Fitting the ‘female’
connector”.)
old ‘female’ connector new ‘female’ connector
Should you wish to convert more than one cable
system, the new female connector is available as an
accessory from most major DIY retail outlets and from
Black & Decker service agents (cat. no. A6624S).
Existing powered garden tools
(UK only)
To connect existing Black & Decker garden power
tools to the new system you will require an adaptor
(see below). This is available as an accessory from
most major DIY retail outlets (cat. no. A6623S).
Warning! This adaptor is only suitable for
products rated up to 500W.
It is not recommended for use with the
following:
Hover mowers
Rotary mowers with grass collection
Chainsaws
Shredders
Blowervacs.
Please contact your local service agent
should you require further advice.
Fitting your own extension cable
(UK only)
When fitting your own extension cable fit a
13 amp plug (see “Fitting the mains plug”) to one
end of the cable and a ‘female’ connector
(supplied loose in the carton) to the other end
(see opposite). For wiring instructions see the
following sections.
A ‘male’ connector is already attached to the
electrical supply cable on your mower and is
designed to be non-rewireable (see opposite).
This should not be removed. Should the
cable and plug become damaged or need
replacing, please return your mower to your local
Black & Decker service agent.
ENGLISH
GL340 UK p02-11 w/p 24/3/00, 2:17 pm5
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GL340 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GL340 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info