16290
10
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
10
ENGLISH
KG70: Place the outer flange (12) onto the
spindle with the raised centre facing towards
the disc (A in fig. F).
KG68/KG75/CD500: Place the outer flange (12)
onto the spindle. When fitting a grinding disc,
the raised centre on the outer flange must face
towards the disc (A in fig. F). When fitting a
cutting disc, the raised centre on the outer
flange must face away from the disc (B in fig. F).
KG68/CD500: Hold the spindle using the
wrench (13) and tighten the outer flange using
the two-pin spanner (14) (fig. G).
KG70/KG75: Keep the spindle lock (3)
depressed and tighten the outer flange using
the two-pin spanner (14) (fig. A & G).
Removing
KG68/CD500: Hold the spindle using the
wrench (13) and loosen the outer flange (12)
using the two-pin spanner (14) (fig. G).
KG70/KG75: Keep the spindle lock (3)
depressed and loosen the outer flange (12)
using the two-pin spanner (14) (fig. A & G).
Remove the outer flange (12) and the disc (5).
Fitting and removing sanding discs (fig. A, H & I)
For sanding, a backing pad is required.
The backing pad is available from your
Black & Decker dealer as an accessory.
Fitting
Remove the guard as described above.
Place the inner flange (10) onto the spindle (6)
as shown (fig. H). Make sure that the flange is
correctly located on the flat sides of the spindle.
Place the backing pad (15) onto the spindle.
Place the sanding disc (16) onto the backing pad.
Place the outer flange (12) onto the spindle with
the raised centre facing away from the disc.
KG68/CD500: Hold the spindle using the
wrench (13) and tighten the outer flange using
the two-pin spanner (14) (fig. I).
KG70/KG75: Keep the spindle lock (3)
depressed and tighten the outer flange using
the two-pin spanner (14) (fig. A & I).
Removing
KG68/CD500: Hold the spindle using the
wrench (13) and loosen the outer flange (12)
using the two-pin spanner (14) (fig. I).
KG70/KG75: Keep the spindle lock (3)
depressed and loosen the outer flange (12)
using the two-pin spanner (14) (fig. A & I).
Remove the outer flange (12), the sanding disc
(16) and the backing pad (15).
After sanding, refit the guard on the tool.
USE
Let the tool work at its own pace.
Do not overload.
Carefully guide the cable in order to avoid
accidentally cutting it.
Be prepared for a stream of sparks when the
grinding or cutting disc touches the workpiece.
Always position the tool in such a way that the
guard provides optimum protection from the
grinding or cutting disc.
Switching on and off (fig. J)
To switch on, slide the on/off switch (1)
forward.
To switch off, press the rear part of the on/off
switch.
Hints for optimum use
Firmly hold the tool with one hand around the
side handle and the other hand around the
motor housing (fig. K).
When grinding, always maintain an angle of
approx. 15° between the disc and the
workpiece surface (fig. L).
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
SAG.P65 17-07-2001, 14:5110
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker CD501 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker CD501 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker CD501

Black Decker CD501 Gebruiksaanwijzing - Nederlands - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Nederlands - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Deutsch - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Deutsch - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - English - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - English - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - English - 16 pagina's

Black Decker CD501 Gebruiksaanwijzing - Français - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Français - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Italiano - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Italiano - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Português - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Português - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Espanôl - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Espanõl, Espanôl - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Dansk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Dansk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Svenska - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Svenska - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Norsk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Norsk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Suomi - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Suomi - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info