16290
9
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
9
ENGLISH
Do not use the plug if the fuse cover is missing
or damaged.
Never use a light socket.
Using an extension cable
Always use an approved extension cable suitable
for the power input of this tool (see technical
data). Before use, inspect the extension cable for
signs of damage, wear and ageing. Replace the
extension cable if damaged or defective.
When using a cable reel, always unwind the cable
completely. Use of an extension cable not suitable
for the power input of the tool or which is
damaged or defective may result in a risk of fire
and electric shock.
CARTON CONTENTS
The carton contains:
1 Angle grinder
1 Side handle
1 Flange set
1 Two-pin spanner
1 Wrench (KG68/CD500)
1 Instruction manual
Carefully unpack all parts.
Please note that additional items may be
found in the carton, depending on the letter
suffix following the catalogue number of your
tool.
OVERVIEW (fig. A)
1. On/off switch
2. Side handle
3. Spindle lock (KG70/KG75)
4. Guard
5. Grinding or cutting disc
ASSEMBLY
Before attempting any of the following
operations, make sure that the tool is
switched off and unplugged.
Fitting and removing the guard
Fitting (fig. B)
Place the tool on a table, with the spindle (6)
facing up.
Hold the guard (4) over the tool as shown.
Align the lug (7) with the slot (8).
Press the guard down (A) and turn it
counterclockwise (B).
Removing (fig. C)
While holding the tool, turn the guard (4)
clockwise.
Use a screwdriver to press down the locking
pin (9).
Release the guard and take it off the tool.
Never use the tool without the guard,
except when sanding.
Fitting the side handle (fig. A)
Screw the side handle (2) into one of the
mounting holes in the tool.
Always use the side handle.
Fitting and removing grinding or cutting discs
(fig. A, D - G)
Always use the correct type of disc for
your application. Always use discs with the
correct diameter and bore size
(see technical data). The maximum
thickness for grinding discs is 6 mm,
for cutting discs 3.5 mm.
Fitting
Fit the guard as described above.
Place the inner flange (10) onto the spindle (6)
as shown (fig. D). Make sure that the flange is
correctly located on the flat sides of the spindle.
Place the disc (5) onto the spindle (6) as shown
(fig. E). If the disc has a raised centre (11),
make sure that the raised centre faces the
inner flange.
Make sure that the disc locates correctly on the
inner flange (not for KG70).
SAG.P65 17-07-2001, 14:519
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker CD501 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker CD501 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker CD501

Black Decker CD501 Gebruiksaanwijzing - Nederlands - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Nederlands - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Deutsch - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Deutsch - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - English - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - English - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - English - 16 pagina's

Black Decker CD501 Gebruiksaanwijzing - Français - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Français - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Italiano - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Italiano - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Português - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Português - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Espanôl - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Espanõl, Espanôl - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Dansk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Dansk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Svenska - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Svenska - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Norsk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Norsk - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Suomi - 76 pagina's

Black Decker CD501 Gebruiksaanwijzing - Suomi - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info