661587
10
Verklein
Vergroot
Pagina terug
1/109
Pagina verder
10
b) connect between the DC output socket and
the battery terminals using a charging leads.
The leads shall be connected making sure of
the (+) and (-)polarity.
c) reset button: Be used to the DC output
outlet to ON or OFF. Push down button, DC
output to ON, Be provided the DC socket with
the over-current protection function.
d)12VDC 5A is rated condition ,it will reach
18VDC at no-load condition,even more.
7.4 Switching off the engine
• Before you switch off the generator, allow
it to run briey with no electrical equipment
connected so that it can cool down.
• Move the ON/OFF switch (Item 7) to the "O"
Off position.
• Close the stop cock (Item 3).
8. Cleaning, maintenance, storage,
transport and ordering of spare parts
S
witch off the motor and pull the spark
plug boot from the spark plug before doing
any cleaning and maintenance work on the
equipment.
Important: Switch off the generator
immediately and contact your service station:
• In the event of unusual vibrations or noise.
• If the engine appears to be overloaded or
misres.
8.1 Cleaning
• Keep all safety generators, air vents and
the motor housing free of dirt and dust as far
as possible. Wipe the generator with a clean
cloth or blow it with compressed air at low
pressure.
• We recommend that you clean the generator
immediately each time you have nished
using it.
• Clean the generator regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the
plastic parts of the equipment. Ensure that no
water can seep into the generator.
8.2 Air lter (Fig 6-7)
Clean the air lter at regular intervals, and
replace it if necessary. Please also read the
service information.
• Remove the air lter cover (Item E).
• Remove the air lter (Item G).
• Clean the air lter by tapping it. In cases
of stubborn dirt rst clean with soapy water,
then rinse with clear water and air-dry before
reinserting. Important: Do not use abrasive
cleaners or petrol to clean the air lter.
• Assemble in reverse order.
8.3 Spark plug (Fig. 8-9)
Check the spark plug for wear at regular
intervals. Please also read the service
information.
• Pull off the spark plug boot (Item I) by
twisting it.
• Remove the spark plug (Item J) using the
supplied spark plug wrench.
• Clean the spark plug with a copper wire
brush or t a new one.
• Assemble in reverse order.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BD 1000i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BD 1000i in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info