PLEASE READ AND SAVE THESE
INSTRUCTIONS
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:
• Use the fan only for purposes described in
the instruction manual.
•To protect against electrical shock, do not
immerse the fan, plug or cord in water or
spray with liquids.
• Close supervision is necessary when any
appliance is used by or near children.
• Unplug from the electrical outlet when not in
use, when moving the fan from one location
to another, before putting on or taking off
parts and before cleaning.
•Avoid contact with any moving parts.
• Do not operate in the presence of explosive
and/or flammable fumes.
• Do not place the fan or any parts near an
open flame, cooking or other heating
appliance.
• Do not operate any appliance with a
damaged cord, plug, after the appliance
malfunctions, or has been dropped/damaged
in any manner.
• The use of attachments not recommended
or sold by the appliance manufacturer may
cause hazards.
• Do not use outdoors.
• Do not let the cord hang over the edge of a
table or counter, or come into contact with
hot surfaces.
•To disconnect from the electrical supply, grip
the plug and pull from the wall outlet. DO
NOT pull on the cord.
• Always use on a dry, level surface.
• The fan should not be operated laying on its
side.
• This product is intended for household use
ONLY and not for commercial or industrial
applications.
• Should the fan stop working, first check the
fuse in the plug (UK only) or fuse/circuit
breaker at the distribution board is operating,
before contacting the manufacturer or
service agent.
• If the supply cord or plug is damaged, it
must be replaced by the manufacturer or its
service agent or a similarly qualified person
in order to avoid hazard.
DESCRIPTIONS:
A. Power Cord
B. Cord Clamp
C. Front Column
D. Rear Column
E. 4 Screws
F. Rear Base
G. Front Base
H. 4 Screws
I. Speed Control
J. Timer Control
K. Oscillation Control
L. Fan Housing
MISSING A PART FOR YOUR FAN?
Please call 0800 052 3615 for assistance.
ASSEMBLY INSTRUCTIONS
1. Assemble Column (C, D) to Fan housing (L)
making sure the cord is enclosed between
the Column (C, D). Secure together with 4
screws (E). Refer to Fig. 2.
2. Assemble Base (F, G) to already assembled
Fan housing and Column (C, D, L) making
sure the cord is enclosed between the Base
(F, G). Secure thogether with 4 screws (H).
Refer to Fig. 2.
3. Secure Power Cord (A) to bottom of base (F, G).
Refer to Fig. 3.
OPERATING INSTRUCTIONS
(Refer to Fig. 1)
Power Off:
Select Speed = O, or, Select = O
Continuous Operation:
Select = I
and
Select Speed = III, II, I
Timer Control:
Select = Turns off in up to 120 minutes
and
Select Speed = III, II, I
Oscillation Control:
Press = Oscillation on, off
CLEANING AND MAINTENANCE
• Always unplug the fan before cleaning or
assembly.
• Do not allow water to drip on or into the fan
motor housing.
ENGLISH
2
