614660
75
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
75Trouble shooting
Trouble shooting
In most cases you will be able to identify and remedy
faults by checking the following.
Check whether:
·the upper and lower threads are threaded correctly
·the needle is inserted as far up as possible with the flat
side to the back
·the needle size is correct check the needle/thread
table
·the machine is clean brush out any thread lint
·the hook race is clean
·any threads are trapped between the tension discs or
under the bobbin case spring
Upper thread breaks
·upper thread tension is too tight
·needle is not designed to be used with the chosen
thread
·needle has been inserted incorrectly the flat side of
the shank must be to the back
·needle is bent or blunt
·for additional needle information, check the Creative
Consultant and the charts on pages 7172
·poor quality, knotted or dried out thread has been used
·use the correct spool disc
·stitch plate or hook tip damaged take your machine
to your BERNINA®dealer
Lower thread breaks
·the lower thread tension is too tight.
·the bobbin is jamming in the bobbin case. Remove and
replace the bobbin.
·the hole in the stitch plate has been damaged by the
needle. This must be polished by an authorized
BERNINA®service technician
·the needle is blunt or bent.
Skipped stitches
·wrong needles used use only 130/705H system
·the needle is blunt, bent or incorrectly inserted push
completely to the top when inserting.
·the needle point does not suit the fabric being sewn
if necessary, use a ball point or stretch needle for
knitted fabrics and a cutting point for hard leather.
Needle breaks
·needle clamp screw loose.
·fabric taken out forward instead of behind the presser
foot.
·when sewing over thick area, the fabric was pushed
with the needle still in the fabric.
·poor quality thread, unevenly wound or knotted.
Faulty stitching
·remnants of thread between the tension discs
·remnants of thread under the bobbin case spring
·incorrect threading. Check upper and lower threads
·use the correct spool disc
Machine fails to run or runs slowly
·plug not fully inserted
·power switch in off (0) position
·machine has been standing in a cold room
·bobbin winder engaged
Machine sews in reverse
·reverse sewing function is activated
Defective sewing-light
·Please note that it is forbidden to change the
new CFL-sewing light by a unauthorized person.
For Models with this new CFL-sewing light,
the light can ONLY be replaced by an authorized
Bernina Dealer.
bed_artista_180_engl_V3 7.10.2002 16:30 Uhr Seite 75
75

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bernina-Artista-180

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bernina Artista 180 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bernina Artista 180 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bernina Artista 180

Bernina Artista 180 Gebruiksaanwijzing - Nederlands - 40 pagina's

Bernina Artista 180 Gebruiksaanwijzing - Deutsch - 40 pagina's

Bernina Artista 180 Gebruiksaanwijzing - English - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info