Deleting the User Fingers9
See
Figure 6
It is not possible to delete individual fingerprints. If the user fingers are deleted,
only the master fingers and radio code will be retained.
Push the cover up to the 1. second notch or press the ON button to activate the
device.
The green LED is illuminated and indicates the identification mode.
Press the PRG button for at least 5 seconds. 2.
The green LED will go out and the blue LED flashes slowly.
Pull a master finger over the finger sensor. 3.
The green LED will slowly flash once as a positive acknowledgement.
The blue LED flashes quickly and indicates that the system is ready to learn a
user finger.
Press the PRG button again for 15 seconds. 4.
The blue LED will go out and after 5 seconds the blue LED flashes slowly;
after a further 10 seconds it flashes faster for a period of 5 seconds.
Afterwards, the green LED is illuminated.
All user fingers have been deleted.
22
TR20B001 RE / 07.2009
ENGLISH