577840
25
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
09/ 2012
BENNING PV 1-1
19
the BENNING PV 1-1.
- Switch on the BENNING CC 3 current clamp adapter and select the 40 A range.
- Switch on the BENNING PV 1-1 and press the
Auto
-key
3
until the symbol B for current
clamp measurement is displayed.
- For direct current (DC) measurements, press the null balance key (ZERO) of the
BENNING CC 3 until a current value of approx. 0 A is displayed.
- Enclose the single-wire live conductor by means of the current clamp adapter.
- The measured current will be shown on the display
1
.
See gure 8: AC/ DC current measurement by means of optional current clamp adapter
BENNING CC 3
8.6 Measurement on several identical PV modules/ PV strings
For PV systems with several identical PV strings, the open-circuit voltages and short-circuit cur-
rents must be compared with each other at stable radiation conditions. The values should be
identical and should have a maximum deviation of 5 % (at stable radiation conditions). Moreover,
the measured values have to be compared with the values to be expected.
- At the beginning of the series of measurements, press and hold the -key
8
and the
-key
6
in order to delete the measured value memory.
- Connect the first PV string of the PV generator to the BENNING PV 1-1.
- Press the
Auto
-key
3
to start the automatic measurement of the first PV string.
- Press the -key
8
to store the measured values.
- Connect the next PV string to the BENNING PV 1-1 and press the
Auto
-key
3
to start the
automatic measurement.
- Press the -key
8
to store the measured values.
- Repeat this procedure for all identical PV strings at stable radiation conditions.
- After measurement, the stored measured values can be recalled pressing the -key
6
. As
soon as a measured value deviates by more than 5 % from the average value of all stored
measured values regarding the open-circuit voltage or short-circuit current, the ">5%" sym-
bol O starts flashing.
- To call the average values, press the -key
6
repeatedly until the storage location 0 is
displayed. The average values of the open-circuit voltage and of the short-circuit current are
shown on the display
1
.
See gure 6: Automatic solar panel measurement, ISO measurement via earthing conductor
8.7 Measured value memory
8.7.1 Storing measured values
The BENNING PV 1-1 can store up to 200 display screens. Depending on the measure-
ments carried out, the values for protective conductor resistance, open-circuit voltage, short-
circuit current, insulating resistance with testing voltage and even the measured AC/DC current
( BENNING CC 3) are stored with a date/ time stamp.
- Press the -key
8
to store the displayed measured values to the first free storage location.
Successful storage will be confirmed by the "STORE" symbol L on the LC display
1
.
8.7.2 Calling measured values
- Press the -key
6
to recall the stored measured values with the corresponding storage
location number N. The symbol “RECALL” M is displayed
1
. The storage location number
N is shown on the display
1
.
- Press the -key
6
to go to the previous storage location.
8.7.3 Deleting the measured value memory
- To delete the entire measured value memory, press the
-
key
8
and the -key
6
.
8.7.4 Warning in case of the measured value deviating by 5 %
- In case the displayed measured value memory (open-circuit voltage and short-circuit cur-
rent) deviates by 5 % from the average value of all stored measured values, the "5%" symbol
starts flashing.
8.7.5 Average value of the entire measured value memory regarding the open-circuit voltage
and short-circuit current
- Press the -key
6
repeatedly until the storage location 0 N is shown on the display
1
.
The symbol “RECALL” M is displayed
1
.
- The storage location 0 N calculates the average values for open-circuit voltage and short-
circuit current from all stored measured values.
8.7.6 Reading out the measured value memory via the USB interface
To read out the measured values via the USB interface
7
, you have to install the hardware driver
from the "Treiber-driver" directory on the enclosed CD-ROM and then the download program
from the CD-ROM's "Programm-program" directory on your PC once.
In order to download the data, please proceed as follows:
- Disconnect all safety measuring leads from the BENNING PV 1-1.
- Connect the BENNING PV 1-1 to your PC by means of the USB connecting cable.
- The hardware driver is installed automatically on a free COM port and confirms that the new
hardware can be used.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning PV 1.1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning PV 1.1 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 10,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Benning PV 1.1

Benning PV 1.1 Snelstart handleiding - Nederlands, Français, Italiano, Espanõl - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info