577341
29
Verklein
Vergroot
Pagina terug
1/169
Pagina verder
20
9. Maintenance
BeforeopeningtheBENNINGMM1-1/1-2/1-3,makesurethat
thedeviceisfreeofvoltage!Electricaldanger!
Working on the opened BENNING MM 1-1/ 1-2/ 1-3 under voltage must be car-
ried out by skilledelectricianswithspecialprecautionsfortheprevention
ofaccidentsonly!
Make sure that the BENNING MM 1-1/ 1-2/ 1-3 is free of voltage as described
below before opening the device:
- First, remove both safety measuring leads from the object to be measured.
-
Then, remove both safety measuring leads from the BENNING MM 1-1/ 1-2/ 1-3.
- Switch the rotary switch 8 to position „OFF“.
9.1 Securing the device
Under certain circumstances, safe operation of the BENNING MM 1-1/ 1-2/ 1-3
might no longer be ensured, e.g. in case of:
- visible damages of the housing,
- incorrect measuring results,
- recognizable consequences of prolonged storage under inadmissible condi-
tions and
- recognizable consequences of extraordinary stress due to transport.
In such cases, immediately switch off the BENNING MM 1-1/ 1-2/ 1-3, discon-
nect it from the measuring points and secure it against further use.
9.2 Cleaning
Clean the exterior of the device with a clean dry cloth (exception: special
cleaning wipers). Do not use any solvents and/or abrasives to clean the device.
Make sure that the battery compartment and the battery contacts are not con-
taminated by leaking battery electrolyte.
If there are electrolyte contamination or white deposits in the area of the battery
or the battery compartment, clean these areas as well by means of a dry cloth.
9.3 Batteryreplacement
BeforeopeningtheBENNINGMM1-1/1-2/1-3,makesurethat
thedeviceisfreeofvoltage!Electricaldanger!
The BENNING MM 1-1/ 1-2/ 1-3 is supplid by means of two integrated 1.5 V
micro (AAA) batteries.
Battery replacement (see gure 13) is required, if the battery symbol appears
on the display .
Proceed as follows to replace the battery:
- Disconnect the safety measuring leads from the measuring circuit.
- Disconnect the safety measuring leads from the BENNING MM 1-1/ 1-2/ 1-3.
- Switch the rotary switch 8 to position „OFF“.
- Put the BENNING MM 1-1/ 1-2/ 1-3 face down and unscrew the screw of
the battery compartment cover.
- Lift off the battery compartment cover from the bottom part of the battery
compartment.
- Remove the discharged batteries from the battery compartment.
- Insert the new batteries into the battery compartment observing correct po-
larity.
- Lock the battery compartment cover into place on the bottom part and
tighten the screw.
See gure 13: Battery replacement
Makeyourcontribution for environmentalprotection! Do not
dispose of discharged batteries via the household waste.
Instead,return themtoacollectingpointfordischarged bat
teries or special waste. Please look for information in your
community‘sfacilities.
9.4 Fuse replacement (BENNING MM 1-2/ 1-3)
BeforeopeningtheBENNINGMM1-2/1-3,makesurethatthe
deviceisfreeofvoltage!Electricaldanger!
The BENNING MM 1-2/ 1-3 is protected against overload by means of an inte-
grated fuse (G fusible insert) 10 A (see gure 14). Proceed as follows to replace
the fuse:
09/ 2013
BENNING MM 1-1/ 1-2/ 1-3
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning MM 1.2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning MM 1.2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds als bijlage per email.

De handleiding is 12,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info