577341
28
Verklein
Vergroot
Pagina terug
1/169
Pagina verder
19
BENNING MM 1-1/ 1-2/ 1-3.
- Bring the safety measuring leads into contact with the measuring points. If the
lead resistance between the COM jack J and the jack for V, , , Hz 9 falls
below 25 , the integrated buzzer of the BENNING MM 1-1/ 1-2/ 1-3 sounds.
See gure 8: Continuity test with buzzer
8.6 Capacitymeasurement (BENNING MM 1-2/ 1-3)
Beforeperformingcapacitymeasurements,dischargecapaci
torscompletely!
Neverapplyvoltagetothecapacitymeasurementjacks!
Thismightdamage ordestroythedevice!A damageddevice
might represent an electrical hazard!
- Select the desired function ( ) by means of the rotary switch 8 of the
BENNING MM 1-2/ 1-3.
- Determine the polarity of the capacitor and completely discharge the ca-
pacitor.
- Connect the black safety measuring lead to the COM jack J of the
BENNING MM 1-2/ 1-3.
- Connect the red safety measuring lead to the jack for V, , , Hz 9 of the
BENNING MM 1-2/ 1-3.
- Bring the safety measuring leads into contact with the discharged capacitor
according to ist polarity and read the measured value on the digital display
of the BENNING MM 1-2/ 1-3.
See gure 9: Capacity measurement
8.7 Frequencymeasurement (BENNING MM 1-2/ 1-3)
- Select the desired function (Hz) by means of the rotary switch 8 of the
BENNING MM 1-2/ 1-3.
- Connect the black safety measuring lead to the COM jack J of the
BENNING MM 1-2/ 1-3.
- Connect the red safety measuring lead to the jack for V, , , Hz 9 of
the BENNING MM 1-2/ 1-3. Please observe the minimum sensitivity for fre-
quency measurements of the BENNING MM 1-2/ 1-3!
- Bring the safety measuring leads into contact with the measuring
points and read the measured value on the digital display of the
BENNING MM 1-2/ 1-3.
See gure 10: Frequency measurement
8.8 Temperature measurement (BENNING MM 1-3)
- Select the desired function (°C or °F) by means of the rotary switch 8 of the
BENNING MM 1-3.
- Connect the temperature measuring adapter and the temperature meas-
uring lead to the COM jack (-) J and to the jack for V, , , Hz (+) 9
observing correct polarity.
- Arrange the end of the temperature measuring lead in the vicinity of the heat
source to be monitored. Read the measured value on the digital display
of the BENNING MM 1-3.
See gure 11: Temperature measurement
8.9 Voltage indicator
The voltage indicator function is possible from each position of the rotary switch.
No measuring leads are required as voltage indicator (non-contact detection
of an alternating eld). The detector is located on the upper part of the device
behind the LED. By pressing the „VoltSensor“ key 5, the display indication dis-
appears (if the display is switched on). If a phase voltage is localized, this is
indicated by an acoustic signal and a red LED signal M. An indication is made in
earthed AC current networks only! The phase can be determined by means of a
single-pole measuring lead.
Practical hint:
Interruptions (cable breaks) in cables lying around openly such as e.g. cable
reels, fairy lights etc. can be traced from the feeding point (phase) to the point
of interruption.
Functional range: 230 V
See gure 12: Voltage indicator with buzzer
8.9.1 Phase test
- Connect the red safety measuring lead to the jack for V, , , Hz 9 of the
BENNING MM 1-1/ 1-2/ 1-3.
- Bring the safety measuring lead into contact with the measuring point of the
system part and press the „VoltSensor“ key 5.
- If the red LED lights and if there is an acoustic signal, the phase of an
earthed AC voltage is applied to this measuring point (system part).
09/ 2013
BENNING MM 1-1/ 1-2/ 1-3
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning MM 1.2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning MM 1.2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds als bijlage per email.

De handleiding is 12,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info