577174
16
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
09/ 2013
BENNING CM 1-1/ 1-2
10
measurement/ continuity test
7
Sliding switch, for selecting the measuring function,
8
Jack (positive
1
), for V and Ω
9
COM jack, common jack for voltage/ resistance measurements and conti-
nuity test,
J
Opening lever, for opening and closing the current clamp,
K
Bulge for current clamp, protects against contact with conductor,
L
Measuring clamp, for clamping on the single-wire live conductor,
1)
This is what the automatic polarity indication for DC voltage refers to
5. General information
5.1 General information on the current clamp multimeter
5.1.1 The digital display
1
is a 3½-digit LC display with a font size of 14 mm
and a decimal point. The highest numerical value to be displayed is
2000.
5.1.2 The polarity indication
2
works automatically. Only a polarity contrary
to the jack denition is indicated with “-“.
5.1.3 The range exceedance is indicated by “ 0L“ or “- 0L“ and partly by an
acoustic warning.
Attention, no indication and warning in case of overload!
5.1.4 Measured value storage “HOLD“: Press the “HOLD“ key
4
to store the
measuring result. At the same time, the display shows the “H“ symbol.
Press the key again to switch back to the measuring mode.
5.1.5 The MAX key function
5
automatically determines and stores the high-
est measured value. By pressing the key, the following values are dis-
played:
“MAX“ shows the highest stored value. The continuous determination of
the MAX value can be stopped or started by pressing the “HOLD“ key
4
. Press the “MAX“ key to switch back to normal mode.
5.1.6 Press the
6
V~/ V or / key to select the secondary function of the
sliding switch position (see indication on the display).
5.1.7 The nominal measuring rate of the BENNING CM 1-1 is 2.5 measure-
ments per second for the digital display. The nominal measuring rate of
the BENNING CM 1-2 is 1.5 measurements per second for the digital
display.
5.1.8 The BENNING CM 1-1/ 1-2 can be switched on or off by means of the
sliding switch
7
. Switched off: position “OFF“.
5.1.9 The BENNING CM 1-2 is switched off automatically after approx. 10
minutes (APO, Auto-Power-Off). It is switched on again if a key or the
sliding switch is operated. A buzzer tone indicates that the device is
switched off automatically. The BENNING CM 1-1 is not provided with
an APO function.
5.1.10 Temperature coefcient of the measured value: 0.2 x (stated measuring
accuracy)/ °C < 18 °C or > 28 °C, related to the value for the reference
temperature of 23 °C.
5.1.11 The BENNING CM 1-1 is supplied by means of a 9 V block battery (IEC
6LR61).
The BENNING CM 1-2 is supplied by means of two integrated 1.5 V
micro (AAA) batteries (IEC LR 03).
5.1.12 If the battery voltage falls below the specied operating voltage of the
BENNING CM 1-1/ 1-2, a battery symbol appears on the display.
5.1.13 The battery life is approx. 580 hours for the BENNING CM 1-1 and ap-
prox. 200 hours for the BENNING CM 1-2 (alkaline battery).
5.1.14 Dimensions of the BENNING CM 1-1:
(L x W x H) = 180 x 70 x 42 mm
Weight: 200 g
Dimensions of the BENNING CM 1-2:
(L x W x H) = 190 x 70 x 38 mm
Weight: 225 g
5.1.15 The enclosed safety measuring leads are explicitly intended for the
nominal voltage and the nominal cuurent of the BENNING CM 1-2.
5.1.16 Largest clamp opening: 30 mm
5.1.17 Largest cable diameter: 27 mm
6. Ambient conditions
- The BENNING CM 1-1/ 1-2 is intended for measurements under dry ambi-
ent conditions,
- Maximum barometric height for measurements: 2000 m,
- Overvoltage category / installation category: IEC 60664-1/ IEC 61010-1
→ 600 V category III,
- Contamination class: 2,
- Protection category: IP 30 (DIN VDE 0470-1 IEC/ EN 60529)
3 – rst index: protection against access to dangerous parts and protection
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning CM1.1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning CM1.1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Zweeds als bijlage per email.

De handleiding is 4,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info