660502
28
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
28 X AIR User Manual
adjusted. If applicable, a tap tempo button is available to manually enter the rate
of delays or choruses. The button will ash to indicate the tempo. Click the Insert
button to engage the eect as an insert instead of side-chain. Select the channel
or bus assigned to the eect with the pull-down menu. See the Eects Overview
chapter for more details.
7.10 Meter Tab
The Meter tab allows easy monitoring of all analog and digital levels,
including USB channels, Buses, Ultranet outputs, and the Main and Solo buses.
7.11 Setup Menu
The Setup menu allows the wireless connection to be congured and allows
various global parameters to be selected and adjusted.
Connect Tab
After you connect your computer to the internal Access Point or external router,
the software will likely automatically recognize the mixer and ask to connect.
Once connected, a prompt will ask if you would like to transfer settings from the
mixer to PC, or from the PC to the mixer. Click ‘cancel’ if you don’t want to sync
settings. The Connection tab also allows you to manually assign an IP address.
If you have rmware 1.09 or later, you can update the rmware directly from this
screen as well.
Note - save your settings to your computer’s hard drive before updating
the rmware!
By default, a generic name, such as XR18-1B-10-F3, will be assigned to your
mixer. This can be changed to something more specic and recognizable.
The console can also be initialized back to its factory state, but be aware that all
settings will be erased. We highly recommend using the Save function to store
any important scenes to your computer's hard drive.
Access Point, WLAN, LAN Tabs
The Access Point, WLAN and LAN tabs allow the wireless connection to be
congured. See the 'Network Connection' chapter for details.
Audio/MIDI Tab
The Audio/MIDI tab allows various global settings to be assigned. The console
can operate at 48 kHz or 44.1 kHz. Mute the main LR fader before changing clock
rates as pops can occur.
Engage the Safe Levels function to automatically mute the outputs during a
power cycle. This is particularly useful for situations where the mixer is always
connected to a PA system or monitoring setup.
The Link Preferences allow specic preamp elements to be synchronized when
adjacent channels are linked.
The console defaults to “soft mutes”, meaning that if a channel has been
specically muted, and is also a part of a mute group, when the mute group
is unmuted, the channel that was specically muted will also be unmuted.
Selecting Hard Mutes will cause a channel that has been muted with its
dedicated Mute button will remain muted even if a mute group to which it
belongs is unmuted. DCA Groups normally just control volume levels without
actually having audio routing through them. However, engaging DCA Groups in
the Mute System will enable channels to be muted via DCA group assignments.
The X18/XR18 has an 18x18 channel interface built-in, but sometimes
this is overkill for a recording session. For overdubs and simple tracking,
the 2x2 interface is more ecient and easier on processing power.
Various send (Tx) and receive (Rx) preferences are selectable for the
MIDI conguration.
Monitor Tab
The monitor source defaults to the main LR (post-fader), but you can select a
bus, aux, USB 17/18 or a combination of buses. Soloed channels and buses can be
monitored pre or post-fader. PFL attenuation can be engaged and the relative
levels for monitor and source can be set. Click the DIM button to enable dimming
and select the attenuation level. The monitor bus can be set to mono and can be
muted from this page.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer XAir - XR12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer XAir - XR12 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer XAir - XR12

Behringer XAir - XR12 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info