660502
27
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
27 X AIR User Manual
3. Use the Reset button to return all bands to their default settings.
A conrmation box will pop up to prevent accidental resets.
4. Select the Mode from the pull-down menu. PEQ types will often be used for
the rst 3 bands, and a high cut or high shelf for the 4th band.
5. The currently-active band will be indicated on this button.
6. Click this button to turn a specic band on and o. This is useful for A/B
testing how an adjustment aects the signal.
7. The gain adjustment for each band can be manually entered here, or you can
click and drag the band's corresponding number up and down.
8. The bandwidth (Q) can be manually entered here.
9. Each bands specic frequency can be manually entered, or you can click and
drag the band's number to the desired frequency.
10. Engage the Spectrograph function to change from the standard RTA view to
a spectrogram, which displays the signal energy over time. This can be useful
for identifying feedback or phasing problems.
11. Press the Pre button to display the RTA pre-EQ rather than post-EQ.
12. Engage the RTA (Real Time Analyzer) with this button.
7.6 Comp Tab
1. Select one of the 4 Presets to automatically optimize the parameters for one
of these common sources.
2. Engage the Compressor with this button.
3. Adjust the Threshold at which the compressor begins to take eect.
Audio that falls below this setting will remain unaected.
4. Select between a Compressor or Expander to set the action of the dynamics
processor. While a compressor reduces a signal's dynamics, an expander
increases the dynamic range.
5. Select a Knee angle to set how gradual the compressor takes eect.
When set to 0, any signals that rise above the threshold will receive the full
compression ratio.
6. Select between Peak and RMS input response. RMS is most common
in compressors and responds to the average level of incoming audio,
whereas the Peak setting responds to brief spikes in loudness that would be
allowed through when set to RMS.
7. Select between an aggressive Linear or smooth Logarithmic operation.
8. Adjust the Ratio to determine how aggressively the dynamics are aected.
9. Adjust the Mix to determine how much of the signal is left unaected by
the processor.
10. Adjust the Gain to compensate for changes in level caused by the processor.
11. Engage the Auto Time to allow several of the more advanced parameters to
be automatically adjusted according to the input signal.
12. Adjust the Attack to set how quickly the compressor takes eect when the
input signal rises above the threshold.
13. Adjust the Hold to set how long the compressor takes to enter the release
cycle once the audio drops below the threshold.
14. Adjust the Release to set how quickly the compressor releases after the audio
drops below the threshold.
15. Engage the key Filter with this button.
16. Select the type of lter and frequencies with these faders.
17. Select a channel or bus for the side chain lter from the pull-down menu.
7.7 Sends Tab
The Sends tab allows the currently-selected channel's signal to be routed to the
6 Aux buses and to the 4 FX processors. These adjustments can also be made on
the Channel tab, or by selecting one of the Fader Bank layers on the lower right-
hand side of the main view screen. The signal can be routed to the buses from
specic points in the preamp chain, such as pre or post EQ and pre or post fader.
Clicking the globe icon will enable changes to the tap point (pre/post fader, etc)
to take eect on all channels.
7.8 Main Tab
All of the controls on the Main tab are also accessible from the Channel tab.
The channel’s signal can be unassigned from the main output, which is useful
when recording sources that aren’t meant to be heard by the audience, or for
sources such as click tracks that are only meant for the performers’ mixes and
not the main speakers. The channels pan control can be adjusted and DCA,
Mute Group and Auto Mix assignments can be made as well.
7.9 FX Tab
The FX tab has 4 eect processors that can be routed and adjusted to various
channels and buses. A new eect can be selected by clicking the pull-down menu
where the current eect’s name is displayed, or by clicking the Type button which
also shows a graphic view of each eect. Once a desired eect is selected, click on
the graphic to bring up the edit window where the specic parameters can be
(8) (9) (10) (12) (13) (14)
(1)
(2) (5) (11) (15) (17)(6)(7)(3) (4)
(16)
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer XAir - XR12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer XAir - XR12 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer XAir - XR12

Behringer XAir - XR12 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info