765604
10
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
www.beamzlighting.com
1) Activate the programming mode by pressing the PROGRAM key for 2 seconds. The PROG LED is flashing on the
display.
2) Select the running light program via the CHASE keys (1-6) to which you wish to add one or more scenes (steps).
3) Press the TAP SYNC/DISPLAY key once. The STEP LED will light up on the display.
4) Select the step number via the BANK arrow keys behind which you wish to insert a new scene.
5) Program a new scene as described in the section PROGRAMMING OF RUNNING LIGHT SCENES.
6) Press the MIDI/REC (MIDI/ADD) key and the step sequence number on the display increases by 1.
7) Press once again the MIDI/REC (MIDI/ADD) key and the scene will be added.
8) Press the TAP SYNC/DISPLAY key and then the PROGRAM key in order to leave the program mode.
CLEARING A STEP (SCENE)
1) Activate the programming mode by pressing the PROGRAM key until the PROG LED on the display is flashing.
2) Choose the running light program via one of the CHASE keys from which you want to remove a step (scene).
3) Press the TAP SYNC/DISPLAY key once.
4) Use the BANK up/down keys to choose the step number (scene) to be cleared.
5) Press the AUTO/DEL key once. The scene is cleared and the display flashes to confirm.
6) Press the TAP SYNC/DISPLAY and then the PROGRAM key to leave the programming mode.
CLEARING A RUNNING LIGHT PATTERN (CHASE)
1) Keep the desired CHASE key (1-6) pressed and press at the same time the AUTO/DEL key once.
CLEARING ALL RUNNING LIGHT PATTERNS
1) Keep the AUTO/DEL key pressed and switch the power supply off by unplugging the power connector on the rear side.
2) Release the AUTO/DEL key and switch the power supply on again.
PLAYING THE PROGRAMMED SCENES
Manual Operation
1) After having switched on the power supply, always start the DMX operator in the manual mode.
2) Check if the indicator LEDs MUSIC TRIGGER and AUTO TRIGGER on the display are switched off. If necessary,
press the MUSIC/BANK-COPY and AUTO/DEL keys to switch them off.
3) Select the desired memory bank via the BANK arrow keys and press the SCENE keys (2).
Automatic Play
1) This function allows you to play in cycle all scenes that are programmed in a memory bank.
2) Press the AUTO/DEL key to activate the automatic play mode. The AUTO TRIGGER LED on the display must light up.
3) Select the desired memory bank via the BANK arrow keys. The scenes are now played in sequence.
4) The SPEED and FADE controls are used to set the speed and the fading time.
5) During automatic play you can at any time chose another memory bank via the BANK arrow keys.
MUSIC CONTROL
1) Switch the music-control on via the MUSIC/BANK-COPY key. The built-in microphone reacts to the rhythm of the
music.
2) Select the desired memory bank via the BANK arrow keys.
3) Press the MUSIC/BANK-COPY key to switch the music controlled mode off.
USE OF RUNNING LIGHT PATTERNS
MANUAL OPERATION
1) Prior to running light patterns you need to program scenes !
2) This function enables you to play scenes manually in random sequence.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BeamZ 154.060 - DMX-192S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BeamZ 154.060 - DMX-192S in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info