765604
8
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
www.beamzlighting.com
LED DISPLAY
The display shows light green, easy to read symbols that indicate following functions:
1. The first figure indicates the selected running light pattern (CHASE) (1 6)
2. The second figure shows which one of the 8 scenes has been selected.
3. The third and fourth figure shows which one of the 30 memory banks is active.
4. In AUTO MODE, a light dot is displayed in the bottom right corner.
5. The MUSIC MODE (music-control) is shown by a dot on the top right side of the display.
6. The BLACKOUT MODE is indicated by a flashing dot in the upper left corner.
7. In programming mode, a flashing dot appears on the bottom left side of the display.
PROGRAMMING OF THE VARIOUS FUNCTIONS
Programming of the running light scenes
1. Make sure that all units to be controlled, are connected and set to the correct DMX start addresses.
2. Keep the program key (6) more than 2 seconds pressed to activate the programming mode. The green dot in the left
bottom corner should flash and continue to flash during the programming process.
3. Select the required unit via one of the SCANNER keys. Up to 16 channels per unit are available, 1 to 8 on page A and
9 to 16 on page B. Press the PAGE SELECT key until the LED next to the row 1 to 8 (PAGE A) lights up.
4. Set the desired light intensity, position of the mirror, colour or gobo via the slider controls. If required, press PAGE
SELECT to program a second set of 8 settings if the connected unit offers more than 8 channels.
5. To store these settings, press the MIDI/ADD or MIDI/REC key.
6. Select now with the BANK arrow keys (4) the requested memory bank where you want to store this scene. N.B. The
unit features a memory of 30 banks of which each can contain 8 scenes.
7. Press now one of the scene keys (2) and the settings will be stored. You can control this on the display. The second
figure indicates the scene number and the last two figures show the number of the selected memory bank. To confirm
the setting, the LED’s and the display flash a few times.
8. HINT: Please note the scene and bank numbers. It is difficult to search when all 240 memory locations are occupied.
9. Repeat steps 3 to 7 to program other scenes. N.B.! Switch the already programmed units off via the SCANNER keys
(1) otherwise the settings will be transferred.
10. To leave the programming mode, press the PROGRAM key until the flashing dot disappears. After the programming
mode, the unit switches automatically into BLACKOUT mode. Press the BLACKOUT key to switch this mode off.
CHANGE OF ALREADY PROGRAMMED SCENES
1) This function allows you to change already set scenes.
2) Press the PROGRAM key as described above.
3) Select the requested bank number via the BANK arrow keys (use your notes !).
4) Select now the requested scene via the correct scene key.
5) Make the new settings via the slider controls.
6) Press the MIDI/REC (or MIDI/ADD) key and then the scene key (see point 4) to store the new settings.
7) Attention! Select the correct scene key otherwise you will overwrite by mistake the settings of a scene that you did
NOT want to change.
COPYING OF SETTINGS
1) This function allows to copy settings from one unit to another unit. This features is easy and time saving especially for
the programming of running lights.
2) Press the SCANNER key of the unit from which you want to copy the settings and press at the same time the key
from the unit into which you want to copy the settings. Release both keys. The settings have been transferred.
COPYING SCENES
1) This function allows you to copy the settings from an already programmed scene to a new scene.
2) Switch the programming mode on by pressing the PROGRAM key until the green dot in the bottom left corner is
flashing.
3) Select the required memory bank via the BANK arrow keys which contains the scene that you wish to copy.
4) Press the correct scene key.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BeamZ 154.060 - DMX-192S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BeamZ 154.060 - DMX-192S in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info