10
1. Removal of packaging and inspection:
After removing the packaging, check that the
machine has not been damaged din transit and
that the door closes correctly.
If in doubt, contact a qualified technician or
your retailer.
• Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of
children, as they are potentially hazardous.
• This dishwasher has been factory tested to
ensure it functions correctly.
Such testing may leave slight water marks that
will disappear with the first wash.
2. Electrical connections and hose
connections:
All connections to the water supply and the
electrical power supply must be made by
qualified personnel in accordance with the
manufacturer’s instructions and applicable local
safety regulations (see also the enclosed
installation instructions).
This dishwasher is designed for domestic use.
Do not use the dishwasher if it has any signs of
damage sustained in transit. Contact After-Sales
Service or your local dealer.
(Refer to the separate installation
instructions booklet)
3. Water inlet and drain:
• Observe any special regulations issued by
your local Water Board.
Water supply pressure: 0.05 - 0.9 MPa.
• Make sure the inlet and drain hoses are kink-
free and are not crushed.
• If the hose length is not sufficient, please
contact your local dealer or our After-Sales
Service.
• The inlet hose must be securely connected to
the water tap to prevent leaks.
• The inlet water temperature varies according
to the model installed. Inlet hose marked
”25°C Max”: maximum temperature 25°C.
All other models:maximum temperature
60°C.
• When installing the appliance, make sure the
drain water discharges correctly (if necessary,
remove the wire gauze from the sink siphon).
• Attach the drain hose to the siphon securely
using a hose clip.
Only for appliances equipped with water stop
system: if the connection instructions are
followed correctly, the water stop system is
able to prevent water leaking from the
appliance and damaging your home.
4. Electrical connection:
• All local electricity board regulations must be
complied with.
• Supply voltage information is shown on the
rating plate mounted inside the door on the
right hand side.
• The appliance must be earthed as prescribed
by law.
• Do not use extension leads or multiple socket
adapters.
• Always unplug the appliance from the mains
socket before carrying out any maintenance.
• If necessary, the power cable may be replaced
with an identical one obtained from our
After-Sales Service. The power cable must
only be replaced by a qualified technician.
Warning for models with LCD:
The mains plug must always be easily accessible
after installation of the appliance.
• Per l’Austria: if the appliance is connected in
series to a fault current circuit breaker, this
must be sensitive to the pulsating current.
EC Declaration of conformity
This appliance has been designed, constructed and
distributed in compliance with the safety
requirements of EC Directives:
• 73/23/EEC
• 89/336/EEC
• 93/68/EEC
Load capacity:
12-13-14 place settings (depending on the model).
BEFORE USING THE DISHWASHER /
CONNECTIONS
