758154
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
English
10
against the sword. Wait until the saw
chain has cooled down before
re-tensioning.
The tension of the saw chain is impor-
tant for your safety and the function of
the machine. A correctly tensioned saw
chain increases the service life of the
machine.
Check the chain tension before each use.
The saw chain is correctly tensioned if it
can be pulled around the sword by hand
(wear protective gloves) without sagging.
With new saw chains, you must readjust
the chain tension again after a short
period of operation.
8.6 Work instructions
Never reach over the riving knife (4) or
under the base plate (8). There is a risk
of injury!
Do not cut if the saw chain is in contact
with the workpiece, is in the workpiece or
may hit an object. This can lead to seri-
ous injuries.
Clamp loose workpieces before cutting
them. Remove foreign objects such as
nails, screws, etc.
When cutting a branch that is under
tension be alert for spring back. When

the spring-loaded limb may strike the
operator and/or throw the Nexxsaw out
of control.
Use extreme caution when cutting brush
and saplings. The slender material may
catch the saw chain and be whipped
toward you or pull you off balance.

place the base plate (8) on the surface of
the workpiece and let the saw cut on its
own. Apply only light pressure to the
saw. The chain speed should not be
much slower.
8.7 Changing the saw chain
Only handle the saw chain with gloves

Inspect the saw chain and the guide bar
for damage or signs of wear.
Never put a new saw chain on a worn
guide bar.

When attaching the saw chain, observe
the running direction!
8.8 Kick-back
The shape of the riving knife (4) largely
eliminates the risk of kick-back.
The saw is optimally protected against
kick-back by the riving knife with tip pro-
tection. Never remove the riving knife (4).
There is a risk of injury!
8.9 Sharpen the saw chain
The saw teeth must be sharpened if the
sawdust becomes powdery, if additional
force is required for the incision, if a
straight incision is no longer possible or
if the vibrations become stronger.
Blunt saw chains should be
re-sharpened.
To sharpen the chain use a chain sharp-
ener, make sure you sharpen the chain at
a 30° angle.
Or have the chain re-sharpened profes-
sionally (advised).
Replace the saw chain if there is consid-
erable damage that cannot be repaired

8.10 Cleaning the guide bar
(See Fig. F).
Thoroughly clean the notch of the guide
bar.
Replace the guide bar if the guide groove
is damaged or worn and the saw chain
has too much lateral space.
Tighten all accessible screws, if
necessary.
9. Maintenance, cleaning and
storing
For best performance, always keep the saw
blade and the Nexxsaw in good order.
Remove the battery pack from the tool
before carrying out any adjustment, servic-
ing or maintenance.
Clean the sprocket area with a brush or
compressed air. (See Fig. G).
Use a cloth, a paintbrush or a brush to
remove dust and wood splinters. Always
keep the ventilation slots clean and free
from obstructions.
7063578-Nexxsaw-Ma-WoF-1910-08.indb 10 15-10-19 17:12
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-NXS001 - 7063578 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-NXS001 - 7063578 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info