758289
10
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
English
8
Do not set the mitre angle during
use.
Slacken the Allen screws (III) using the
Allen key (II).
Tilt the saw shoe (I) to the required
position.
Tighten the Allen screws (III) using the
Allen key (II).
13. Using the pendulum action
switch
The pendulum action switch is used to set
the way in which the teeth of the saw blade
grip the material. The pendulum action
switch can be set to 4 positions.
Do not set the pendulum position during
use.
Turn the pendulum action switch (9) to
required position according to the material
to be worked. Refer to the table below to
select the required position.
Material Pendulum position
Wood . . . . . . . . . . 1 — 3
Plastics . . . . . . . . . . .
1
Aluminium . . . . . . . . 0 — 1
Steel . . . . . . . . . . . . 0
Ceramics . . . . . . . . . . 0
Rubber . . . . . . . . . . . 0
14. Dust removal
The saw is equipped with a changeover
switch for dust removal (7).
14.1 Set the switch to II to open the dust
outlet. The dust is thus blown away,
which improves the visibility of the cut-
ting line.
14.2 Set the switch to I to close the outlet.
When connecting a vacuum cleaner
(see next chapter), set the switch to the
I position.
15. Dust collection
This jig saw is a powerful tool that can pro-
duce a lot of sawdust. By connecting the jig
saw to a vacuum cleaner, a clean dust-free
operation is possible.
Do not use dust extraction when cutting
metal.
Dust extraction is not possible for mitre
cuts.
15.1 Slide the dust nozzle (6) all the way into
the opening until the snap-in nose visi-
bly and audibly locks into place.
15.2 Connect the dust nozzle (6) with a vac-
uum cleaner or dust extractor.
When sawing wood, it is best to use an
additional dust protection mask since
wood dust is a health hazard.
16. The parallel stop
To cut parallel to a wood edge, you can use
the enclosed parallel stop (15).
16.1 In order to x the parallel stop (15),
loosen the fastening screws (11)
slightly. Using the centimetre scale on
the parallel stop (15), you can adjust the
distance between the stop bar and the
saw blade.
7062849-Jig_Saw_800W-Ma-1803-09.indb 8 22-03-18 11:07
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-JS002 - 7063410 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-JS002 - 7063410 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info