758293
11
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
9
English
3. Make sure that the vehicle has the neg-
ative pole on the ground (see manual of

4. Make sure the device is turned off.
5. Make sure that the ignition key is set to
“OFF/OFF. For keyless systems, make
sure that the ignition is turned off com-
pletely before connecting the mobile
power station.
6. Apply the parking brake or parking
brake of the vehicle. (On vehicles with
manual transmission, set the shift lever
to the neutral position.) On vehicles with
automatic transmission, set the lever to
the “P” position).
7. Plug the starter cable (A) into the corre-
sponding socket (8).
8. For vehicles with the negative pole to
ground, connect the red battery termi-
nal Plus to the positive pole of the vehi-
cle battery.
9. Now connect the black battery terminal
Minus only to a grounded point on the
vehicle (e.g. on the engine, chassis or
other grounded location on the vehicle).
10. Turn on the device with the ON/OFF
switch (2).
11. Press the start button (3). The device

seconds. The display (6) shows “OK”.
12. If the vehicle battery is so weak that the
pilot light does not illuminate, wait
about 15 minutes before attempting to
start the engine.
13. Now start the engine. The start attempt
must not take longer than 15 seconds.
Take a break of at least one minute after
each start attempt.
14. As soon as the engine starts, switch off
the device with the ON/OFF switch (2).
15. First remove the black battery terminal
Minus and then the red battery terminal
Plus. When removing the battery termi-
nals, make sure that the cables do not
come into contact with rotating parts of
the motor.
16. Remove the starter cable from the
device.
17. After successfully starting the engine,
wait until it runs smoothly.
12. Jump Start – Special Procedure
with negatively earthed Battery
Older vehicles can still have the positive
pole at the mass.
When starting a vehicle with a negatively
earthed battery, follow the
steps 1 – 7 in chapter Jump Start - Stand-
ard Procedure.
8. First connect the black battery terminal
Minus to the negative pole.
9. Now connect the red battery terminal
Plus to the frame of the vehicle.
Then follow the steps 10 – 17, as described
in the chapter Jump Start – Standard
Procedure.
13. Operating the Compressor
The compressor of the device generates
during operation loud noises that can dam-
age the hearing. Wear ear protection while
operation.
1. Unwind the air hose (14) completely and


2. Use an adapter from the adapter set (B).
3. Open the lever (15), insert the valve plug
(16) onto the valve and push the lever
down.
4. Turn on the device with the ON/OFF

decrease) the air pressure, depress and
hold the buttons (9/10) for at least 5
seconds. To increase the air pressure,
press the plus button (10). To decrease
the air pressure, press the minus

5. To turn on the compressor, press the
compressor button (11). The compres-
sor starts audibly and begins to pump.
6. To turn off the compressor, press the
button (11) again.
7. Open the lever and remove the valve

8. If necessary, check the new air pressure

manometer.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-JS001 - 7063516 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-JS001 - 7063516 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info