758293
10
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
English
8
2 bars and less = The battery charge is low.
The battery must be
charged immediately
10. Charging the built-in Battery
The built-in battery is partially charged at
the factory. Before using the device for the

with the included power adapter.
1. To check the charging status, turn on
the device with the ON/OFF switch (2).
2. If the displayed charging status is low
(less than 3 bars), turn off the power
with the ON/OFF switch (2) and charge
the battery before each use.
3. Connect the power adapter (C) to the
charging socket (12) and to power
mains.
The charge status indicator bars indi-
cate that the built-in battery is charging.
When the built-in battery reaches its
maximum capacity, all four bars appear
on the display.
Charge the built-in battery completely.
Do not charge the built-in battery via the
vehicle electrical system.
Do not use the device while the built-in
battery is charging.
Hints
Only operate the device if the charging
status displays at least three bars. This
corresponds to a battery charging

Avoid deep discharging of the built-in
battery.
The built-in battery of the device must
be charged after each use and at least
once a month, even if the charging
indicator shows three bars.
Do not store the device too cold. At
sub-zero temperatures they may be
delays, as the device needs to warm up

The device is equipped with built-in
fuse, short-circuit, overvoltage and
over-temperature protection.
Improper handling of the battery can
damage the device.
When the built-in battery is charging, all
other functions of the device cannot be
used.
It is not possible to use several func-

compressor, USB connection or 12 V
DC connection) at the same time.
The LED work light can only be used
with one additional function at a time.
Important Notes on Jump Starting

circuit or explosion in case of incorrect
connection of the charging cable to the
vehicle battery.
connect the black battery termi-
nal Minus-
tems or similar parts that come into
contact with fuel.
connect the battery terminals to
each other. Otherwise, there is a risk of
a short circuit.
Do connect the black battery termi-
nal Minus to the negative pole of the
vehicle battery, as the gases in the vehi-
cle battery may explode.
Switch off all consumers in the vehicle
(air conditioner, heated windows, radio,
lights, chargers, etc.) in order to use the
-
ing the engine.
Run the cables of both battery clamps
Plus and Minus so that they cannot be

compartment.
Do disconnect the discharged vehi-
cle battery from the vehicle electrical
system.

well-ventilated environment.
11. Jump Start – Standard Proce-
dure with negative Pole to
Ground
1. Wear suitable work clothing, protective
gloves and safety goggles.
2. 
watches, necklaces) before starting the

10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-JS001 - 7063516 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-JS001 - 7063516 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info