758282
12
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
English
10
12.3 Assembling a cutting / sanding disc
(See g. C)
Unscrew the small screw (a) on top of man-
drel, then insert an appropriate cutting/
sanding disc into mandrel and lightly tighten
(a) with wrench. Do not
over-tighten, or the cutting/ sanding disc
may crack.
12.4 Assembling felt wheel or tip
(See g. D)
The felt wheel or tip should be screwed on
the mandrel.
12.5 Assembling a sanding drum
(See g. E)

(a) on top of the sanding drum
shank. Slide the sanding drum onto the
(a)
again.
12.6 Installation of auxiliary handle
You can use the machine with or without
auxiliary handle. Therefore, use proper
guard (3)
Depending on the work ahead it is recom-
mended to use auxiliary handle and hold the
machine with both hands.
Disconnect the power tool from power
supply.
Unscrew and remove the guard (3).
Put auxiliary handle (1) on the machine.
Install and tighten appropriate guard
(3).
12.7 Installation of exible shaft
Before assembly always remove
the plug from the mains!
Loosen and remove front plastic guard
(3) (g. G).
Pull some of the cord (a) (g. H) from
(11) so its end can be
installed in the collet nut (b) (g. H).
Press and hold spindle lock button (4).
Tighten the collet nut (2) with the sup-
plied wrench.

shaft (11).

the positioning nut (g. I).
12.8 Installation and replacement of acces-
sories in exible shaft holder
(g. F)
Before assembly always remove
the plug from the mains!


shaft spindle locking.
(a).
Insert the accessory into the collet that
matches the shank size of the
accessory.
Tighten the collet nut (a) with the sup-
plied wrench.

spindle locking (b).
13. Switch on/off
To turn on the machine, press the “I” side of
the ON/OFF switch (9). To turn off the
machine, press the “0” side of the ON/OFF
switch(9).
14. Speed setting
The tool has a variable speed selector (6)
for precise speed adjustment numbered “8
to “35. The speed can be adjusted from
8,000 to 35,000 min-1.
Always choose the correct speed range for
your work according to the material.
Determine the correct speed for work on
any material by practicing on a piece of
scrap.
14.1 Adjustment of the speed
After setting the switch (9) position to ‘I
you can change spindle rotational
speed by choosing appropriate number
shown on the display (6) range from 8
to 35.
You can change rotational speed by
(7).
Press the button ‘+’ (many times if
needed) to increase speed.

needed) to decrease speed.
Choose a low speed when working with
wood, plastics and polishing.
7062854-Compact-Tool-170W-Ma-1803-27.indb 10 14-05-18 10:20
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-CT001 - 7063419 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-CT001 - 7063419 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info