758282
10
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
English
8
corners. This may cause kickback or
loss of control.
e. Do not attach a saw chain woodcarv-
ing blade or toothed saw blade. Such
blades create frequent kickback and
loss of control.
5. Safety warnings specic for
grinding and abrasive cutting-off
operations
a. Use only discs intended for your elec-
tric tool. Discs not intended for the
electric tool cannot be covered in a
suitable way and are unsafe.
b. Use discs only for the purpose they
are intended for by the manufacturer.
Never use the side of a cutting disc for
grinding. Cutting discs are intended for
cutting only. Lateral forces may cause
fracture.
c. Do not use worn-down discs from
larger electric tools. These are not
intended for the fast speeds of smaller
electric tools and may fracture.
d. Avoid blocking the disc and do not use
excessive pressure. Do not attempt
excessively deep cuts. Excessive loads
on the cutting disc increase the stress
and make it more prone to jamming or
blocking and increase the risk of kick-
back of fracture.
e. Do not position your body in line with
and behind the rotating wheel. When
the wheel, at the point of operation, is
moving away from your body, the possi-
ble kickback may propel the spinning
wheel and the power tool directly at
you.
f. When wheel is binding or when inter-
rupting a cut for any reason, switch off
the power tool and hold the power tool
motionless until the wheel comes to a
complete stop. Never attempt to
remove the cut-off wheel from the cut
while the wheel is in motion otherwise
kickback may occur. Investigate and
take corrective action to eliminate the
cause of wheel binding.
g. Do not restart the cutting operation in
the workpiece. Let the wheel reach full
speed and carefully re-enter the cut.
The wheel may bind, walk up or kick-
back if the power tool is restarted in the
workpiece.
h. Support panels or any oversized work-
piece to minimize the risk of wheel
pinching and kickback. Large work-
pieces tend to sag under their own
weight. Supports must be placed under
the workpiece near the line of cut and
near the edge of the workpiece on both
sides of the wheel.
i. Use extra caution when making a
“pocket cut” into existing walls or
other blind areas. The protruding wheel
may cut gas or water pipes, electrical
wiring or objects that can cause
kickback.
6. Safety warnings specic for wire
brushing operations
a. Be aware that wire bristles are thrown
by the brush even during ordinary
operation. Do not overstress the wires
by applying excessive load to the
brush. The wire bristles can easily pen-
etrate light clothing and/or skin.
b. Allow brushes to run at operating
speed for at least one minute before
using them. During this time no one is
to stand in front or in line with the
brush. Loose bristles or wires will be
discharged during the run-in time.
c. Direct the discharge of the spinning
wire brush away from you. Small parti-
cles and tiny wire fragments may be
discharged at high velocity during the
use of these brushes and may become
imbedded in your skin.
d. Do not exceed 15,000 RPM when
using wire brushes.
7. Residual risks
Even when you use this electric power tool
correctly, residual risks remain. The follow-
ing dangers may arise in connection with
the construction and application of electric
power tools, among other things:
Lung damage if no suitable protective
dust mask is used.
7062854-Compact-Tool-170W-Ma-1803-27.indb 8 14-05-18 10:20
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-CT001 - 7063419 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-CT001 - 7063419 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info