589861
114
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
114
For more troubleshooting information, visit freshTECHAutoCanner.com.
Observed Issue Cause What To Do
The Display is
showing Error “E9”.
The Lid was not locked. Ensure the Lid was locked properly.
See User Manual.
Cold water was added to
the Inner Pot and filled to the
indicated fill line.
Always add hot tap water to indicated fill
line on the Inner Pot.
Cold food product was filled
into the hot jars instead of
hot food product.
Always follow the recipes provided in the
included Recipe Book. Hot food should
be added to the hot jars, one jar at a time,
immediately after cooking the recipe provided
in this Recipe Book.
Regardless of the cause, you should reprocess
the food following the instructions in the
Reprocessing Jars section of the freshTECH
Recipe Book.
The Display is
showing Error “E12”.
Process was interrupted by
pushing the “Stop/Reset”
button before the end of
the process.
You can immediately Reset by pressing
Stop/Reset button. However if the process
interruption continues beyond 1 minute,
we recommend you stop the process and use
the food within one week with refrigeration.
Reprocess the food immediately following the
instructions on page 21 of this book.
The Display is
showing Error “E10”.
Power interruption. In case the Preserving process of your
freshly prepared foods is terminated due to
power interruption, please remove the food
from the appliance and do not re-process.
Place the jars in the refrigerator to consume
food within one week.
The Display is
showing Error “E11”.
Safety precaution. Please contact our Fresh Preserving
Helpline at 1-800-240-3340.
There is a crackling
sound and smoke
is emitted from
the bottom of the
Inner Pot.
There is residual food that
has spilled onto the heat
plate.
Press and hold the Stop/Reset button for 2
seconds and then unplug the power cord.
Remove pot, wait for components to cool
and wipe off any residue left on the heating
element.
If the problem persists please contact
our Fresh Preserving Helpline at
1-800-240-3340.
At the end of the
process I cannot
get the Appliance
to default back
to the Welcome
display screen.
The Reset sequence was
not followed at the end of
the program.
Once the “Preserving Complete” text is
illuminated and the green Ready light is
flashing, the Appliance is indicating that it
is safe to remove the jars.
Once the jars are removed, press the
Stop/Reset button once, displaying the
“Clean Vent” message.
Proceed to clean the vent with the vent
cleaner and press the Stop/Reset button
again. This will prompt the home screen
to appear.
There may be residue on the
bottom of the Inner Pot.
Carefully remove Inner Pot and check bottom
to ensure clean. If not, wait for Pot to cool
and wipe off any residue.
114

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ball FTAC-13-10 - FreshTech AutoCanner bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ball FTAC-13-10 - FreshTech AutoCanner in de taal/talen: Engels als bijlage per email.

De handleiding is 7,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info