5432 – BT R123e – Edition 06 – 05.06.03
13
Select the OGM you want to
re-record by pressing
Skip
for OGM1 or Skip
for OGM2.
The current message for the
OGM you have selected is
announced. Your Response
123e then invites you to record
your own OGM.
Press and hold down the
Skip
button to commence recording.
After the beep, speak clearly
about 15–30cm from the
microphone. The message
counter will flash to indicate
recording is in progress.
Release the
Skip button to
end recording. Your Response
123e will announce, “Your
outgoing message is…” and will
play the message back to you.
To check your outgoing message
Your current outgoing message
is played back to you when
you switch the answering
machine on by pressing the
Answer on/off button. If the
answering machine is already
on, press the Answer on/off
button to switch it off, then
press it again to switch it back
on again and hear your current
OGM. The message counter
switches between P (message
playback) and the currently
selected OGM, eg. 2.
To switch between OGM1 and
OGM2
Press and hold down the
Answer on/off button. Your
Response 123e will announce,
“Please select outgoing message”.
Press
Skip for OGM1 or
Skip
for OGM2. The
message for the OGM you
have selected is announced.
Your Response 123e then invites
you to record your own OGM.
Press the Stop button.
The OGM is set.
To record your own outgoing
message(s)
You can record your own
outgoing messages for OGM1
and OGM2, each up to 3
minutes long.
Note
OGM2 is ‘Answer only’ so your
version of this message should not
invite callers to leave a message.
Press and hold down the
Answer on/off button. Your
Response 123e will announce,
“Please select outgoing message”.
OR
OR
