For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
Your BT Graphite 1100 is guaranteed for a period
of 12 months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Graphite 1100,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website
to view our advanced user guide or call our helpdesk on *
Activate the batteries by pulling the plastic
tab away from the back of the handset.
Place handset on base to charge.
After 24 hours, plug the telephone line cord
into the telephone wall socket.
: Charge the handset batteries for 24 hours
or your phone may not work.
Activate the batteries by pulling the plastic tab away from the back of the handset.
Activate batteries as explained above.
Place handset on the charger to charge for 24 hours.
If you ever need to remove the batteries, simply slide open the battery
compartment cover and using the nger holes grip the batteries and pull them out.
Plug in mains
power adaptor
(item code 039956).
The telephone line cord
is pre-installed but
plug the other end into
the wall socket yet.
: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Plug the other end of the
power adaptor into the
wall socket and switch on.
