797069
40
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
Problem cause Solution
The door does not open. The door lock is activated due to the
water level in the machine.
• Drain the water from the machine by
running the Pump or Spin programme.
The machine is heating the water or is in
the spin cycle.
• Wait for the program to complete.
The loading door must be blocked
because of the pressure it is under.
• Grasp the handle, push and pull the
loading door, then release it and open it.
If there is no power supply, the
loading door of the device does not
open.
• To open the loading door, open
the pump filter cap and push the
emergency handle on the back of
the cap. Refer to the “Loading
door lock” section
Washing takes longer
than expected
in the manual
of use.(*)
The water pressure is low. • The machine waits until an adequate
amount of water is drawn in order to
avoid poor quality washing due to low
water quantity. This is the reason why
the washing time is prolonged.
The voltage is low. • The washing time is extended to
avoid poor washing results when the
power supply voltage is low.
Water inlet temperature is low. • The time required for water heating
is extended during cold seasons.
Furthermore, the washing time can
be extended to avoid poor washing
results.
The number of rinses and/or the amount of
rinse water has increased.
• The machine increases the
amount of rinse water when a
good rinse is needed and adds an
extra rinse step if needed.
Too much suds have formed and the
automatic suds absorption system has
been activated due to excessive
detergent use.
• Use the recommended amount
of detergent.
The program duration
does not perform any
counting process. (On
models with display) (*)
The timer may stop while drawing
water.
• The timer indicator will not count
down until the machine takes in an
adequate amount of water. The
machine will wait until there is
enough water, to avoid poor
washing results due to lack of water.
The timer indicator will resume
counting down after this.
The timer could stop during the
heating phase.
• The timer indicator will not
count down until the machine
reaches the selected
temperature.
The timer could stop during the
spin phase.
• An unbalanced load automatic
detection system is activated due to
uneven distribution of laundry in
the drum.
The program duration does
not perform any counting
process. (*)
The machine may contain an
unbalanced load.
• An unbalanced load automatic
detection system is activated due to
uneven distribution of laundry in
the drum.
40 / EN Washing machine / User manual
40

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

BEKO-WTV8716-XBWST

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BEKO WTV8716 XBWST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BEKO WTV8716 XBWST in de taal/talen: Engels als bijlage per email.

De handleiding is 4.84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van BEKO WTV8716 XBWST

BEKO WTV8716 XBWST Gebruiksaanwijzing - Nederlands - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info