797069
39
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
5Diagnostic
Problem cause Solution
The programs do not
can't start
after closing the
loading door.
You have not pressed the Start/Pause/
Cancel button.
• Press the Start/Pause/Cancel
button.
In case of excessive loading, it will be
difficult for you to close the loading door.
• Reduce the amount of laundry and
make sure the loading door is
properly closed.
Unable to launch
or select the
program.
The machine has gone into safety mode
due to problems with the power supply
(circuit voltage, water pressure, etc.).
• To cancel the programme, use the
program selector to choose another
programme. The previous program
will be cancelled. (See “Program
Cancellation” section)
Water inside the
machine.
There may be water left in your machine as a
result of quality assurance processes carried
out during production.
• This is not a problem and does not affect
your machine in any way.
The machine does not suck up
water.
The tap is closed. • Open the taps.
The water inlet hose is bent. • Straighten the pipe.
The water inlet filter is clogged. • Cleaning the filter.
The loading door is not closed. • Close the door.
The machine does not drain
the water.
The drain hose may be clogged or twisted. • Clean or straighten the pipe.
The pump filter is clogged. • Cleaning the pump filter.
The machine vibrates or
makes noises.
The machine is not in balance. • Balance the machine by adjusting the feet.
A hard substance has entered the
pump filter.
• Cleaning the pump filter.
The transport safety screws have
not been removed.
• Remove the transportation safety
screws.
The amount of laundry in the machine
is too low.
• Add laundry to the machine.
The machine is overloaded. • Remove a quantity of laundry
from the machine or distribute it
manually in order to balance it
evenly in the machine.
The machine is resting on a rigid object. • Make sure that the machine is not placed
on any object.
Water is leaking from the bottom of
the machine.
The drain hose may be clogged or twisted. • Clean or straighten the pipe.
The pump filter is clogged. • Cleaning the pump filter.
The machine stopped
right after starting the
program.
The washing machine has stopped
temporarily due to low voltage.
• It can resume operation when the
voltage returns to the normal
level.
The machine drains
the water it takes
directly.
The height of the drain hose is not
appropriate.
• Connect the water drain hose
as indicated in the user
manual.
No water is visible in
the machine during
washing.
The water is in the invisible part of the
device.
• This is not a problem.
39 / EN Washing machine / User manual
39

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

BEKO-WTV8716-XBWST

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BEKO WTV8716 XBWST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BEKO WTV8716 XBWST in de taal/talen: Engels als bijlage per email.

De handleiding is 4.84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van BEKO WTV8716 XBWST

BEKO WTV8716 XBWST Gebruiksaanwijzing - Nederlands - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info