519272
22
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
Adjusting the table height
Upper table plate position for logs up to 59 cm
21
Middle table plate position for logs up to 85 cm
Lower table plate position for logs up to 135 cm
Adjusting the splitting cross:
1. Loosen fixing screw.
2. Move the splitting cross to the required position.
3. Mount fixing screw.
Splitting short wood:
1. Upper position of table plate.
2. Place the log on the splitter’s table plate.
L Only split the logs in the direction of the wood fibres.
3. Hold the log tight with the clamping claws.
Splitting long wood:
1. Middle or low
position of table
or base.
2. Remove the
splitting cross.
3. Place the log on
the splitter’s table
or base.
L Possible malfunction when cleaving logs: The log to
be cleaved is not cleaved right through, jams on the cleaving
blade and is pulled up during the blade’s return movement. It
is no longer possible to release the log manually.
In this case, proceed as follows:
1. Switch off the device.
2. Depending on the log still to be cleaved fix the table plate
(6) in the upper position or swing aside the table (7).
3. Switch on the device and continue the splitting operation.
¾ Never try to split two logs at once.
¾ Never try to remove or replace the log during the splitting
process.
L Never try to force the splitting of the log by maintaining
the pressure for several seconds. This can lead to damage
to the machine.
Position the log on the table again and repeat the splitting
phase, or put the log on one side.
How to release a jammed log?
There is a risk of knotted logs getting stuck during the
splitting process.
1. Switch machine off and disconnect the power.
2. Carefully move the stuck log backwards and forwards to
loosen it.
Never hammer on the stuck log.
Never use a saw to cut the stuck log out of the
machine.
Do not enlist the aid of a second person - this is a one-
man job.
Finishing work:
¾ Bring the splitting blade to the lower position (run-in
state).
¾ Release one of the control handles.
¾ Switch the machine off and disconnect the power.
¾ Follow the care and maintenance instructions.
15
14
1. Split logs
up to 59
cm on the
table plate
(6).
2. Split logs
up to 89
cm on the
table (7).
Pull out
the table
plate (A).
3. Split logs
up to135
cm on the
base (10).
Press the
locking
lever (8)
down and
swing
aside the
table (7).
12
Fixing screw
13
Splitting
cross
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Atika ASP 10-1350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Atika ASP 10-1350 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 5,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info