702286
12
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
12 ATS7100/7110 Installation and Troubleshooting Guide
Net 064 INFO 033 022
cr=0010 RELEASE COM
Usr 064 RR 034
Figure 5. ISDN D-channel trace of a call from the
ATS7100 to a Central Station
ISDN D-channel X25 monitoring (ATS7110
mode)
The ATS7110 will also display the X25 traffic on the D-
channel, together with the normal ISDN messages. This
is a powerful tool that can be used for troubleshooting.
Typically the first establishment of a connection will look
as follows:
--> 48244
Usr 002 SABME
Net 002 UA
Net 002 INFO 000 000
LCN 0 RESTART REQ Cause 07 Diag 00
Usr 002 RR 001
Usr 002 INFO 000 001
LCN 0 RESTART REQ Cause 00 Diag 00
Usr 002 INFO 001 001
LCN 1 CALL REQ
Net 002 RR 001
Net 002 RR 002
Net 002 INFO 001 002
LCN 1 CALL ACCEPT
Usr 002 RR 002
! Connected
Usr 002 INFO 002 002
LCN 1 DATA
Net 002 RR 003
Net 002 INFO 002 003
LCN 1 RESET REQ Cause 80 Diag 00
Usr 002 RR 003
Usr 002 INFO 003 003
LCN 1 RESET CONF
Usr 002 INFO 004 003
LCN 1 DATA
Net 002 RR 004
Net 002 RR 005
Net 002 INFO 003 005
LCN 1 RESET REQ Cause 80 Diag 01
Usr 002 RR 004
Usr 002 INFO 005 004
LCN 1 RESET CONF
Usr 002 INFO 006 004
LCN 1 DATA
Net 002 RR 006
Net 002 RR 007
Net 002 INFO 004 007
LCN 1 RESET REQ Cause 80 Diag 02
Usr 002 RR 005
Usr 002 INFO 007 005
LCN 1 RESET CONF
Usr 002 INFO 008 005
LCN 1 DATA
Net 002 RR 008
Net 002 RR 009
Net 002 INFO 005 009
LCN 1 RR
Usr 002 RR 006
! TX Response (OK)
Usr 002 INFO 009 006
LCN 1 DATA
Net 002 RR 010
Net 002 INFO 006 010
LCN 1 RR
Usr 002 RR 007
! TX Response (OK)
Usr 002 INFO 010 007
LCN 1 DATA
Net 002 RR 011
Net 002 INFO 007 011
LCN 1 RR
Usr 002 RR 008
! TX Response (OK)
Usr 002 INFO 011 008
LCN 1 DATA
Net 002 RR 012
Net 002 INFO 008 012
LCN 1 RR
Usr 002 RR 009
! TX Response (OK)
Usr 002 RR 009
Net 002 RR 012
The following messages can be displayed by the dialler:
Message Description
! Connected
The dialler is connected to the Central Station
! Connect Failed
The dialler could not establish a connecting to the Central Station.
Please check the phone number. See also the next tables for more
detailed information.
! Disconnected
The dialler is disconnected from the Central Station
! TX Response (OK)
The message was transmitted successfully to the Central Station
Calls may fail for several reasons. These are described below.
When the message SABME is shown for 4 times on the S0 Monitor, followed by the message !Connect Failed, this may
be caused by:
S0 Monitor shows Possible reasons Solution
No ISDN line connected to the dialler Connect ISDN line
Incorrect TEI value programmed Check menu 19.9.11 X25
TEI Value
Usr 002 SABME
Usr 002 SABME
Usr 002 SABME
Usr 002 SABME
! Connect Failed
No X25 (Digi Access Alarm service in the
Netherlands) is present on the ISDN line
Contact Central Station or
PTT
When the X25/Digi Access Alarm (Netherlands) service is present on the ISDN line, but a connection can not be
established, the dialler will display Cause and Diagnostic values to indicate the reason for the problem.
Cause Diag Reason Solution
80 00 No problem. The scrambling algorithm is
synchronizing and resends the message.
-
80 01 No problem. The scrambling algorithm is -
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aritech ATS7100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aritech ATS7100 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info