In the COOL mode the display lights up. In the DRY and FAN modes the display does not light up.
(6) SLEEP BUTTON
Press this button to activate the Sleep function, which automatically adapts the temperature to changes in body and
room temperature throughout the night, so as to optimise comfort when sleeping and minimise consumption.
In cooling mode, the temperature increases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting
for the whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. The
indicator light turns on whenever the Sleep function is set.
(8) “TIMER” BUTTON
a. When the air conditioner is turned off, press “TIMER” to set a time to turn on the air conditioner. Press “+” or “-“ to set
the time, and press “TIMER” again to confirm it.
b. When the air conditioner is turned on, press “TIMER” to set a time to turn off the air conditioner. Press “+” or “-“ to set
the time, and press “TIMER” again to confirm it.
c. After setting the time, press “TIMER” again to cancel the set time.
Note: After setting the time, press “TIMER” again to confirm it in 5 seconds. Without any operation in 5 seconds, the air
conditioner will confirm the time automatically. Press “TIMER” after confirming the time will cancel the set time.
(6) “SWING” BUTTON
Press “SWING” top turn on or off the swing function.
(7) TEMPERATURE AND ERROR DISPLAY
1. Cleaning the air filters
The air filter must be checked at least once every two weeks of operation. Operating with dirty or clogged filters will
decrease the effectiveness of the air conditioner and can cause serious problems.
To remove the filter, release the rear grille then slide out the filter by gently pulling it sideways.
