807554
11
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
11
The starter aid function of the power
pack is only for vehicles with 12 V on-
board voltage. Before you start, read the
operating instructions of your vehicle, if
and how and external starter aid can be
used. Modern vehicles have sensitive
electronics and control devices that can
be damaged when handled incorrectly.
The control LED (position 5 in the overview) is now red.
For the initial charging process, leave the power pack
connected for 24 hours. For all subsequent charging
processes or directly after use charge no longer than
20 hours. Once the battery is fully charged, the LED is
green. After the charging process,  rst pull out the plug-
in charger from the socket and then unplug the coaxial
power connector from the charging socket of the power
pack. Now close the charging socket with the sealing
plug. If you press the battery test switch now, the control
LED is green.
6.2.2 CHARGING WITH THE 12V MOTOR VEHICLE
CHARGING CABLE
Turn the on-o switch (position 1 in the overview) to
the OFF position. Plug the coaxial power connector of
the cigarette lighter charging cable (position 12 in the
overview) into the charging socket of the power pack
(position 6 in the overview). Now plug the 12V vehicle
plug into the 12V socket of your vehicle. The control LED
(position 5 in the overview) is now red. Charge the power
pack for approx. 6 – 8 hours.
Make sure that the power pack is fully charged. To do so,
press the battery test switch (position 4 in the overview).
Once the control LED is green (position 5 in the overview),
the power pack is ready for use.
Once the battery is fully charged, the LED is green. After
the charging process,  rst pull out the 12V vehicle plug
from the socket of your vehicle and then unplug the
coaxial power connector from the charging socket of
the power pack. Now close the charging socket with the
sealing plug. If you press the battery test switch now, the
control LED is green.
Only charge the power pack while
driving or when the engine is running,
otherwise there is a risk of discharging
the starter battery of your vehicle.
6.3 STARTER AID
CAUTION
Start the engine. Do not let the starter motor work longer
than 6 s. The battery of the power pack is not suitable for
longer start attempts. Between start attempts, take a
break of at least 5 minutes. If the engine doesn‘t turn on
after several attempts, discontinue using the starter aid
and look for the cause of the malfunction.
Now turn the on-o switch to the OFF position. First
remove the black (-) terminal clamp, roll up the cable
and fasten the terminal clamp to its designated holder.
Then remove the red (+) terminal clamp, roll up the cable
and fasten the terminal clamp to its designated holder.
Always adhere to this sequence.
Recharge the power pack.
Turn o the ignition of your vehicle as well as all electrical
consumers (radio, light, rear window heating, seat
heaters, etc.). Enable the parking brake.
Turn the on-o switch (position 1 in the overview) to the
OFF position. First connect the red (+) terminal clamp
(position 11 in the overview) to the positive terminal of
your vehicle battery. Connect the black (-) terminal clamp
(position 10 in the overview) as far away from the battery
as possible to the engine block or chassis (no painted parts).
If the power pack is properly connected, the reverse polarity
protection view is lit green (position 2 in the overview). If
this is not the case, the reverse polarity protection view is lit
red and a warning signal is sounded. In this case, check the
connection of the terminal clamps and correct it. Now turn
the on-o switch to the ON position.
6.3.2 START ATTEMPT
6.3.3 REMOVING THE POWER PACK
6.3.1 CONNECTING THE POWER PACK
VEHICLES WITH NEGATIVE EARTH
In order to be able to work with the compressor,  rst take
the air hose (position 7 in the overview) out of the holder.
To do so, you brie y have to remove the red (+) terminal
clamp from its holder.
6.4 COMPRESSOR
Open the lock on
the valve connector
Place the valve
connector on the valve
6.4.1 FILLING A TYRE WITH THE CAR
VALVE / SCHRADER VALVE
Öffnen Sie die
Verriegelung
am Ventilanschl
Setzen Sie den
Ventilanschl auf
das Ventil
Verriegeln Sie den
Ventilanschl
Sie können jetzt
den Reifen mit dem
Kompressor
befüllen
Fig. 2 Fig. 3
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Apa 16540 - SH317 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Apa 16540 - SH317 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info