Handleiding Alpina TR 250 J (pagina 10 van 24) (Alle talen)

731989

Verklein

Vergroot

Pagina terug

1/24

Pagina verder

4EN

A) TRAINING

1) Read the instructions carefully. Become ac-

quain ted with the controls and the proper use of

the machine. Learn how to stop the engine quickly.

2) Only use the machine for the purpose for

which it was designed, namely

– cutting grass and non-woody vegeta-

tion, using a nylon line (e.g. around the edges

of lawns, owerbeds, walls, fences and small

gras sy areas to tidy up the cutting done using

a mower);

Any other use may be dangerous and damage

the machine.

Examples of improper use may include, but are

not limited to:

– use the machine for sweeping;

– trimming hedges or other jobs in which the cut-

ting device is not used on ground level;

– using the machine with the cutting device above

the operator’s belt level;

– using the machine for cutting non-plant mate rial;

– use of the machine by more than one person.

3) Never allow children or persons unfamiliar with

these instructions to use the machine. Local regu-

la tions can restrict the age of the user.

4) The machine must never be used by more than

one person.

5) Never use the machine:

– when people, especially children or pets are in

the vicinity;

– if the user is tired or unwell, or has taken medi-

cine, drugs, alcohol or any substances which

may slow his reexes and compromise his

judge ment;

– if the user is not capable of holding the machine

rmly with two hands and/or remaining standing

on the ground whilst working.

6) Keep in mind that the operator or user is re-

sponsible for accidents or hazards occurring to

other people or their property.

B) PREPARATION

1) Always wear adequate clothing which does not

hamper movements when using the machine.

– Always wear slim-tting protective clothing, t-

ted with shear-proof protection devices.

– Always wear a helmet, protective gloves, eye-

goggles, a half-mask respirator and safety anti-

shear boots with non-slip soles.

– Always wear ear and hearing protection de vi-

ces.

– Never wear scarves, shirts, necklaces, or any

han ging or apping accessory that could catch

in the machine or in any objects or materials in

the work area.

– Tie your hair back if it is long.

2) WARNING: DANGER! Petrol is highly am-

mable:

– keep the fuel in containers which have been

spe cically manufactured and homologated for

such use;

– never smoke when handling fuel;

– slowly open the fuel tank to allow the pressure

inside to decrease gradually;

– top up the tank with fuel in the open air, using

a funnel;

– add fuel before starting the engine. Never re-

move the fuel tank cap or add fuel while the

engine is running or when the engine is hot;

– if you have spilt some fuel, do not attempt to

start the engine but move the machine away

from the area of spillage and avoid creating any

source of ignition until the fuel has evaporated

and fuel vapours have dissipated;

– immediately clean up all traces of fuel spilt on

the machine or on the ground;

– never start the machine in the same place you

relled it with fuel;

– make sure your clothing does not come into con-

tact with the fuel, on the contrary, change your

clothes before starting the engine;

– always put the tank and fuel container caps back

on and tighten well.

3) Replace faulty or damaged silencers.

4) Before using the machine, check its general

condition and in particular:

– the throttle trigger and the safety lever must

move freely, they must not need forcing and

should return automatically and rapidly back to

the neutral position;

– the throttle trigger must remain locked until the

safety lever is pressed;

– the engine stop switch must easily move from

one position to the other;

– the electric cables and in particular the spark

plug cable must be in perfect condition to avoid

the generation of any sparks, and the cap must

be correctly tted on the spark plug;

– the machine handgrips and protection devices

must be clean and dry and well fastened to the

machine;

– the cutting devices and guards must be un da-

ma ged.

5) Check the correct position of the handgrips

and the connection point of the webbing, and the

proper balance of the machine.

6) Thoroughly inspect the whole work area and

remove anything that could be thrown up by the

machine or damage the cutting group or engine

(stones, branches, iron wire, bones, etc.).

C) OPERATION

1) Do not start the engine in a conned space

where dangerous carbon monoxide fumes can

collect.

SAFETY REQUIREMENTS

3. SAFETY REQUIREMENTS

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Alpina TR 250 J Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info