707218

Alecto DVM-64 Handleiding

5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
Read and keep the instructions. All the safety and
operating instructions should be read before use.
To use your parent unit and baby unit together, you must
be able to establish a radio link between them.
The range will be affected by environmental conditions.
Any large metal objects, reinforced concrete, other solid
structures, radio or electrical equipment between the
baby and parent unit may block the radio signal.
The use of other 2.4GHz products may cause
interference with this product, so keep the baby unit
away at least 1.5 meter from these type of products
or turn the products off if they appear to be caused
interference.
This device can’t replace responsible adult supervision.
This device is designed for indoor use only.
The units should not be exposed to rain or moisture.
The units should not be exposed to direct heat sources.
This product is not a toy and should be kept out of
children’s reach.
This product contains small parts, take care when
unpacking and assembling the product.
Children can become entangled in the cords, therefore
power cords should be kept more than 1 meter away
from the crib and baby’s reach at all times.
The baby units with power cords should never be hung
on or near the crib.
The units should only be used with the AC power
adapters included in this package (rated 5V; 1.0A).
Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause personal
injury or damage to property. Use only the types of the
batteries which are indicated in this manual.
Don’t use the units if the cord or plug is damaged.
Don’t attempt to repair or adjust any of the electrical or
mechanical functions of the unit, if you do, the guarantee
will be made void.
This product should not be used on or under surfaces
that may block the ventilation openings.
This product must not be placed in an enclosed area that
may impede the air ow.
2. MODE OPERATION
2.1 Power save/screen off
Short press power key to turn on/off the screen of the
parent unit.
2.2 Volume adjustment
Press the UP key to increase the volume. Press the
DOWN key to decrease the volume.
2.3 Brightness adjustment
Press the RIGHT key to increase the brightness.
Press the LEFT key to decrease the brightness.
2.4 Baby unit view/scan
Press the scan key / to view/scan the baby units.
During the scan mode, the scan icon will be displayed
on top of the screen. Each baby unit video will stay on the
screen for about 10 seconds, after the 10 seconds another
baby unit video will display on the parent unit etc.
2.5 Digital zoom & move the screen.
Press and hold the key zoom / for about 2 seconds
to operate the zoom in/out function.
After you’ve zoomed in, press the LEFT key to pan left,
press the RIGHT key to pan right, press the UP key to
tilt up and press the DOWN key to tilt down. During the
digital zoom mode, the icon will be displayed on top of
the screen.
Note 1: The baby unit doesn’t move by operating the pan/
tilt function.
Note 2: If you want to adjust the volume/brightness, you
have to exit the zoom mode before you can operate it.
2.6 Talk to the baby
To talk, press and hold the talk / key. The microphone
icon will be displayed on top of the screen while this
function is activated. Release the button when you don’t want
to talk anymore. Now you can listen to the baby’s room.
Note: Bear in mind that you can’t listen to your baby whilst
you’re talking. If you want to listen to the baby, you have to
stop pressing this button.
2.7 Infrared night vision (automatic)
The infrared night vision function allows the baby unit to
pick up images of your baby or the monitored area in dark
or low light conditions. In this mode, only black and white
images will be displayed on the parent unit. The optimum
image is 1.8m / 6 feet distance between the baby unit and
object. When the baby unit is in night vision mode, the icon
will be displayed on top of the screen.
3. MENU OPERATION
3.1 Pairing the baby unit and parent unit
The baby unit is pre-registered to your parent unit. You
don’t need to register it again unless the baby unit loses
its link with the parent unit. To re-register your baby unit, or
register a new baby unit, follow the instructions below.
Note: Before you begin pairing, be sure to have the
parent unit and baby unit side by side.
1. Press the MENU/OK key. The menu will pop up.
2. Press the LEFT key or RIGHT key until the icon is
highlighted. Press the UP key or DOWN key to select
your desired baby unit.
3. Press the MENU/OK key to enter into the sub-menu.
4. Press the UP key or DOWN key to select ADD
CAM then press the MENU/OK key.
5. While the “Pairing” dialogue displayed on the LCD
screen, press the PAIR button on the back of the baby unit.
6. Once paired, it will display “pair is succeed” on the LCD screen.
7. If unsuccessful, please repeat the above steps.
8. Press the key to exit.
3.2 Delete a baby unit
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the baby unit
icon is highlighted. Press the UP key or DOWN key
to select your desired baby unit.
3. Press the MENU/OK key to enter into the sub-menu.
4. Press the UP key or DOWN key to select DEL CAM
then press MENU/OK key.
5. Press the UP key or DOWN key to continue and
delete the baby unit.
6. Press MENU/OK key to conrm the option.
7. Press the BACK key to exit.
3.3 VOX setting
This mode allows you to control the sound activation of
your baby unit. If there is no sound around the baby unit
within 30 seconds, it will stop transmission. When the baby
unit detects any sounds louder than the sensitivity level, it
will start transmitting the signal to the parent unit again. To
change the VOX level, please follow the below instructions.
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the VOX
icon is highlighted, then press the UP key or DOWN
key to select the desired level.
3. Press the MENU/OK key to conrm.
4. Press the BACK key to exit.
Note 1: Once the VOX is turned on, the VOX icon VOX-Lo
or VOX-Hi will display on top of the screen.
Note 2: VOX-Lo is Low sensitivity. The baby have to make a
lot of sound before the VOX function will be activated.
VOX-Hi is High sensitivity level. The baby don’t have to
make a lot of sound before the VOX function will be activated.
DECLARATION OF CONFORMITY
Hereby, Hesdo declares that the radio equipment type Alecto
DVM-64 is in compliance with directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: http://DOC.hesdo.com/DVM-64-DOC.pdf
3.4 Temperature unit setting
1. Press the MENU/OK key. The menu will pop up.
2. Press the LEFT key or RIGHT key until the
temperature icon is highlighted.
3. Press the UP key or DOWN key to select or .
4. Press the MENU/OK key to conrm.
5. Press the BACK key to exit.
Note: For this unit, the environment test temperature
range is 0-50 .
Environment temperature alarm setting
1. Enter the temperature selection interface, press the
DOWN key, choose ALERT . Then press the
MENU/OK key to enter the setup.
2. To open the environment temperature alarm function,
select ON and press the MENU/OK key to conrm.
To close the environment temperature alarm function,
select OFF and press the MENU/OK key to conrm.
3. Set alarm temperature value. Choose ON, then press
MENU/OK to conrm to enter the setup interface of high
and low temperature. Now, the high value appears in a
red box. Press the UP key or DOWN key to adjust the
maximum environment temperature alarm value. After it is
set, press the MENU/OK key to conrm.
When the highest temperature alarm value is set, it will
automatically jump to the lowest temperature alarm value
set. Now, the low temperature alarm value appears in a
red box, press the UP key or DOWN key to make
lowest environment temperature alarm value adjustment,
then press the MENU/OK key to conrm. The system
returns to the beginning automatically. If you don’t want
to change the temperature value, press the BACK key
to exit.
Note 1: Once the temperature alarm is turned on, the
temperature alert icon will display on top of the screen.
Note 2: The high temperature alarm range is from
20-40 . The low temperature is from 0-19 .
3.5 Lullaby setting
You can soothe the baby to sleep by playing a gentle
lullaby from the baby unit.
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the lullaby
icon is highlighted.
3. Press UP key or DOWN key to select one of the 8
available lullabies, single or loop playing.
4. Press the MENU/OK key to conrm.
5. Press the BACK key to exit.
Note 1: Once the lullaby is turned on, the lullaby icon
will display on top of the screen.
Note 2: The lullaby default setting is OFF.
Note 3: Lullaby loop playing function will play all the
lullabies once.
3.6 Alarm setting
You can use the alarm to remind yourself to feed your
baby / change diaper / sleep, etc.
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the alarm
icon is highlighted.
3. Press the UP key to increase or press the DOWN
key to decrease the desired time interval.
4. Press the MENU/OK key to conrm.
5. Press the BACK key to exit.
Note 1: The minimum alarm setting is 0.5 hour. The
maximum alarm setting is 4 hours. In total there are 8
levels.
Note 2: Once the alarm is turned on, the alarm icon will
display on top of the screen.
Note 3: The alarm default setting is OFF.
Note 4: When the alarm is ringing, press any key on the
parent unit to turn the alarm off.
Note 5: If you don’t turn off the alarm, the alarm will ring
for 1 minute. After three minutes the alarm will ring again
for 1 minute. The alarm will ring for three times in total,
after this the alarm goes off.
4. TROUBLE SHOOTING
No reception
on the parent
unit
The power adapters may not be properly
connected.
Conrm that the baby unit and parent unit
are ON.
The baby unit may be too far away from
the parent unit.
The baby unit and parent unit may not be
properly paired. Follow §3.1.
Interference or
poor reception
Move the parent unit closer to the baby unit.
The baby unit or parent unit may be placed
too close to metal objects.
Other electronic devices may be interfering
with the signal. Turn off those devices.
The battery power may be too low.
Howling (static,
screeching)
The baby unit and parent unit may be
placed too close together.
The volume on the parent unit may be set
too high.
Can’t hear the
baby on the
parent unit
Volume setting may be too low.
Image frozen Restart the baby unit (plug out the adapter,
then plug it into the socket again).
Press the reset key at the back of the
parent unit.
5. SPECIFICATIONS
Frequency 2.4GHz FHSS
Frequency range 2413-2488 MHz
Operating Range Indoor: Up to 50 meters
Outdoor: Up to 300 meters
(straight line and open space)
Power adapter Model: K05S050100G
Power adapter
input
Input: 100-240V~50/60Hz 0.2Hz
Output: 5V, 1.0A
Maximum power <10 dBm
LCD 2.4” TFT LCD
Display
resolution
240x320 RGB
Rechargeable
battery for parent
unit
Li-polymer battery pack
3.7V; 950mAh; 3.515Wh
Operating time
with battery fully
charged
Up to 10 hours (VOX on)
Operating
environment
Temperature: 0°C to 40°C (32°F to 104°F)
Relative humidity: 15% - 85%
Storage
environment
Temperature: -20°C to 70°C (-4°F to 158°F)
Relative humidity: 15% - 85%
DVM-64
1. WARNINGS & SAFETY INSTRUCTIONS
GB
v1.0
Hesdo BV
Azielaan 12
5232 BA, ‘s-Hertogenbosch
The Netherlands
www.alecto.com
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Alecto-DVM-64

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DVM-64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DVM-64 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Alecto DVM-64

Alecto DVM-64 Gebruiksaanwijzing - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info