7. Change PIN code: allows you to change the PIN code. The PIN code is a 4-digit code. To change this code, enter
the old code (8008 by default), the new code you want, the new one second time for conrmation. A message
appears conrming the PIN code change.
8. Your TV is now installed. To use the system in DVB-S satellite mode: Press source>TNT, you can see a pre-pro-
grammed channel list by pressing Enter. To switch to DVB-T mode, refer to the channel menu. Choose TV Connec-
tion and select the antenna mode, then launch a search for a channel as described in chapter “Automatic channel
search”. (page 21)
How to use in terrestrial mode
Press Source to display the list of video sources. Use ▲and ▼to select
- ATV to watch analogue programmes (no longer available). Important information: Since November 30th 2011,
no more analogue signal is broadcasted in France.
- DTV to watch digital programmes (terrestrial or satellite). Then press Enter to conrm your choice.
When watching a programme, the main following features are available:
• Ch+/-: go to the next / previous programmes
• 0...9: display a programme by entering the number.
• Vol+/-: increase / lower the volume.
• Fav: display the favourite channel lists.
• EPG: display the EPG (digital terrestrial mode only).
• Display: press once to display limited information, press twice to display all the information corresponding to
the watched programme, press a third time to remove the display.
• TV/Radio: switch between TV and Radio mode (digital terrestrial mode only).
Other features are available in terrestrial television mode. Refer to pages 20.
How to use with an external satellite receiver
Press Source to display the list of video sources. Use ▲and▼ to select :
- AV if your satellite receiver is connected to the TV with a RCA cable (white - yellow - red).
- SCART if your satellite receiver is connected to the TV with a SCART cable.
- YPbPr if your satellite receiver is connected to the television via a YUV cable (blue - green - red)
- HDMI if your satellite receiver is connected to the TV with a HDMI cable. Then press Enter to conrm your choice.
To receive satellite channels with your external satellite receiver it is necessary to switch on the DTV source to
align your antenna to the satellite. After pointing switch back to the HDMI source to display the contents of your
external receiver.
CAUTION: In order to close the automatic antenna, it is also necessary to select the DTV source.
Refer to the chapters on pages 10/11 for the use of your AIO TV with an Alden automatic antenna or manual
antenna.
Information:
Each time you switch the system on, the TV will automatically select the last chosen source.
Page 16
