586591
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
SAFETY
In the event of an electrical hazard, the mains adapter acts as 230V power isolating device. It should therefore, as a
precaution, be installed close to the appliance and be easily accessible. To disconnect the device from the primary power
source, the mains adapter must be removed from the 230V AC / 50 Hz socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure, telephones that use cordless handsets will not
work.
You will then be unable to make or receive calls in the event of an emergency.
This is why we recommend that you also keep a conventional telephone – one that doesn’t require a power supply – as a
backup.
! Do not use your telephone to notify a gas leak when standing in the vicinity of the leak.
It is recommended that you avoid using this device during electrical storms.
Do not attempt to open the batteries, as they contain chemical substances. In the event of leakage, avoid contact with the
skin, eyes, nose and mouth. In the event of contact, rinse the affected part for about twenty minutes with running water
and seek urgent medical attention. Clean the product with absorbent paper or a dry cloth and contact your reseller for
replacement batteries.
ATLINKS hereby declares that the following models conform to the essential requirements and other applicable provisions
of European directive 1999/5/EC.
Alcatel XS
ENVIRONMENT
This symbol means that your inoperative electronic appliance must be collected separately and not mixed
with the household waste. The European Union has implemented a specific collection and recycling system
for which producers are responsible.
This appliance has been designed and manufactured with high quality materials and components that can be recycled
and reused. Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to
work properly but which can become a health and environmental hazard if they are not handled or disposed of in the
proper way. Consequently, please do not throw out your inoperative appliance with the household waste.
If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the
vendor when buying a new appliance.
- If you are a professional user, please follow your supplier's instructions.
- If the appliance is rented to you or left in your care, please contact your service provider.
Keen to preserve the environment, ATLINKS has equipped this appliance with a switching power supply, offering better
energy efficiency. The advantages include not only very low electricity consumption, but also a more compact format than
the conventional power supply units used by the previous range.
The used batteries from your telephone (if it has batteries) must be disposed of in compliance with current environmental
protection regulations. Comply with your local regulations.
Return your batteries to your reseller or dispose of them at an approved recycling centre.
Help us protect the environment in which we live!
TABLE 1: PROGRAMMING SETTING
Remark:
To reset all previous parameters to default settings, you can do it from the Alcatel XS itself.
1) Ringer volume reset to level 3,
2) Ringer melody to 3,
3) All 3 memories to empty.
TABLE 2: COLOR OF LED INDICATION
TABLE 3: TONE INDICATION
TABLE 4: TECHNICAL DETAILS
* Values may vary according to environment.
** Depending on initial battery charge.
TROUBLESHOOTING
If you have difficulty with your phone, please try the suggestions listed below.
www.alcatel-home.com
ATLINKS Europe
22 quai Gallieni
92150 Suresnes- France
© ATLINKS 2012 - Reproduction prohibited.
The Manufacturer reserves the right to modify the specifications of its products in order to make technical improvements
or comply with new regulations.
ALCATEL, VERSATIS and ATLINKS are registered trademarks.
The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent and used under license by ATLINKS.
ALCATEL XS
A/W No.: 10000587 Rev.0 (EN)
The store where you bought your telephone can also provide you with information and after-sales support.
LED Color Behavior Description
Rapid Blink Out of range
During Power On, or Idle mode (per 32 seconds), or Incoming call,
or In Use
(remark: speed of blink is slightly different in each above conditions)
Steady On Programming mode
Registration mode, or
Low Battery level
Steady On
Reset Mode
Charging (always on even if Battery is full)
Blink Unregister Mode
Blue
Blink
Red
Steady On
Violet
Blink
Tone Type Behavior Description
Key Tone One Short Beep Alert when key press
Confirmation Tone One Short Beep
Alert in programming mode when press # to confirm any settings or,
when press # to save editing
Error Tone Two Consequence Short Beep
Alert In programming mode when invalid value is entered
(e.g. Phone Settings) or when registration fail
Low Battery Tone Two Consequence Short Beep Alert when low battery
Out Of Range Tone Two Consequence Short Beep Alert when out of range.
On Cradle Tone
One Short Beep Alert when on cradle
Up to 300 metres*
Up to 50 metres*
4 hours talk time**
100 hours standby**
Charger adaptor:
Input: 100-240 V/50-60 Hz/0.15 A
Output: 6 V DC/500 mA
Only use the adaptors supplied with the telephone
Single-phase AC, excluding IT installations defined by the EN60950 standard.
Caution: The network voltage is classified as a hazard by the criteria of this standard.
From 5ºC to 40ºC
Free Field Range
Indoor Range
Handset Battery Life
(average values)
Batteries
Operating Temperature
Electrical Connection / Charger
Problem Cause Solutions
a. The connection cord of the base
station is not plugged in.
a. Check the connections. Unplug and plug back in the mains.
Check that the telephone line cord has been plugged into the
base station and the phone socket.
b.
The adapter cord is not plugged
in correctly in the base station.
b.
Check the base station plug and the 230V plug (remove and
plug-in).
c. The line is busy, as another
handset is used.
c.
Wait until the line is unoccupied.
d. Wrong connection cord
(no Euro AS)
d.
Use the original connection cord.
e. XS is not yet registered with the
base.
e.
Register XS with the base as per section 4.1.
a. Base station out of range.
b. Base station not connected to
mains.
c. XS out of range.
The call does not
work.
Service not activated or wrong
operator or wrong setting
Reduce the range of base and XS.
Connect base station to mains.
No LED indication.
Empty battery
Put XS into the charger
Two short tone
beeps every 10
seconds & Red
LED is double
blinking
Insert the dialing prefix
No dialing tone
when pressing
key
Menu name Action
Secuencia en el teclado alfanumérico
Ringer volume
control
Ring volume control
Ringtones on
handset
Choose ringer
melody
press " 01" + "number(20 digits in length)" + "#" (complete by hearing a
confirmation tone )
Quick dial Program M1
Quick dial Program M2
Quick dial Program M3
Registration
to be described in
Section 4.1
Reset all parameters
to default (see
remark under table 1)
Manual registration
press " 07" + pin number +"#" (complete by hearing a confirmation tone )
Pin Code Number
Change registration
PIN code
Long press key and for 3 seconds at the same time (complete by hearing a
confirmation tone).
Check your Subscription with network or change the dial mode.
When connect to a
PBX, no and/or
wrong connection
after dialing.
Dialing prefix is needed.
AAA – 1,2 V – 300 mA
Only use the batteries supplied with the XS.
Use any other type of battery presents a risk of explosion. Used batteries must be
disposed of in compliance with current environmental protection regulations.
press " 05" + " "value" +"#" (complete by hearing a confirmation tone);
value = 0 to 5
Wait the end of the melody for selecting another volume.
press " 02" + "number(20 digits in length)" + "#" (complete by hearing a
confirmation tone )
press " 03" + "number(20 digits in length)" + "#" (complete by hearing a
confirmation tone )
press " 04" + " "value" +"#" (complete by hearing a confirmation tone);
value = 1 to 5
Wait the end of the melody for selecting another volume.
Default settings
You can change Pin number to 4 digits number.
The default Pin number is “0000”, 4 digits in length.
Press " 22" + pin number +"#" (complete by hearing a confirmation tone )
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alcatel XS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alcatel XS in de taal/talen: Engels als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Alcatel XS

Alcatel XS Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info