460709
13
Verklein
Vergroot
Pagina terug
1/106
Pagina verder
Log splitter
GB 4
Warning!
Never lay the log on the splitter in trans-
verse direction.
Never force the splitting of a log by
sustaining the hydraulic pressure over
several seconds.
Operation
1. With one hand, press the green switch on
button of the electric motor (Illus. 7-2) and
hold it pressed.
2. After the motor has attained its end speed,
press the operating lever with the other hand
(Illus. 7-1) fully downwards. The log pusher
will press the log against the splitting wedge.
The log will be split.
3. By releasing the green switch-on button or
the operating lever, the log pusher moves
back into its end position.
Transportation
Caution!
Pull out the unit plug and tighten the vent
screw prior to every change of location.
Warning!
Do not transport the log splitter on the
cylinder fastening.
1. Hold the log splitter on the transport bracket
to transport it.
Maintenance and care
Caution!
Switch off the log splitter and disconnect
from the mains power supply prior to
each working operation with the log
splitter. Repairs to the log splitter should
only be realised by a specialist firm or
workshop.
Caring for the log splitter
Cleaning the guide rail
1. Clean the guide rail of the log pusher regu-
larly, especially when splitting wood that is
rich in resin.
Maintenance work
Sharpening the splitting wedge
1. The splitting wedge should be sharpened
with a suitable file if necessary.
Checking the hydraulic oil filling level
Note:
Always check the hydraulic oil level
when the log pusher is moved inwards.
The log splitter should be in a vertical
position.
Caution!
To erect and hold the log splitter a
second person is required.
1. Unscrew and remove the oil inspection rod
and wipe with a clean, lint-free cloth.
2. Insert the oil inspection rod (do not screw it
in) and pull out again. The oil level should be
between the markings "min" and "max" (see
Illus. 11). Top up the hydraulic oil if neces-
sary.
3. Check the seal (Illus. 11-1) for damage and
replace if necessary.
4. Screw in the oil inspection rod and tighten it
slightly, in order to avoid damage to the
threads of the cylinder head.
Warning!
Refill only with viscosity class HLP 46
hydraulic oil.
An oil change is not necessary.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Al-ko KHS 5200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Al-ko KHS 5200 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info