594311
15
Verklein
Vergroot
Pagina terug
1/166
Pagina verder
15
GB
440 102 _a
Starting the electric brushcutter
1. Guide the extension cable through the strain relief,
see Fig. 6.
2. Connect the extension cable to the mains supply.
3. Pass the carry strap over your left shoulder (Fig. 7)
and hook the strap into the eye on the top handlebar
(Fig. 1/7)
4. Stand securely.
5. Hold the machine with both hands. Do not place the
cutter head on the ground when doing this.
6. With one hand, grip the auxiliary hand grip (Fig. 1/8);
with the other hand, grip the upper handle (Fig. 1/4)
and, at the same time, press the lower switch, see
Fig. 8.
7. Press the switch in the upper handle (Fig. 1/5) and
hold it pressed, see Fig. 8. The machine only runs
when both switches are pressed.
8. Let the electric brushcutter run at idling speed for a
few seconds. This causes the cutting line to be cut off
to the correct length.
9. The machine switches off when a switch is released.
After the machine has been switched off, the spool
head continues to rotate for a few seconds.
Operation
Switch on the machine before approaching the grass
to be cut.
Angle the machine forwards slightly, max. 30°, and
walk forwards slowly.
Sweep the machine to the right and left in order to cut
the grass.
Long grass must be cut in several passes. Always proceed
from top to bottom.
Tap the spool head on the ground from time to
time when working. The automatic tip function
always keeps the line at optimum length.
Make sure the motor is stopped before you remove
any cuttings.
IMPORTANT!
The vibration value during use of the electrical
implement may differ from the indicated value,
depending on what the machine is used for.
Do not overload the machine during work.
Extending the cutting line
1. Run the motor at full speed and tap the spool head on
the ground.
The line is automatically extended.
The knife on the guard plate shortens the line to
the permitted length.
Trimming
1. Check the ground and dene what is the required cut
height.
2. Guide the spool head at the required height and hold
it there.
3. Sweep the machine from side to side with a scything
motion.
4. Always keep the spool head parallel with the ground.
Low trimming
1. Guide the machine with a slight forward angle so that
it moves just above the ground level.
2. Always trim away from your body.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Al-ko AL-KO BC 1000 E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Al-ko AL-KO BC 1000 E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info